07:13 <ariellea> hi all, built mainline 4.1.1 for Snow, basic loading appears to work but I cannot get X to start using fbdev nor armsoc. I know it sounds silly but what would my first steps be. I am happy to document what is working/non-working with 4.1.1 mainline.

07:14 <ariellea> (I use the kernel signing method, not nv-uboot)

07:36 <Wizzup> ariellea: hi

07:37 <Wizzup> What are the errors in the X log?

07:37 <Wizzup> did you see our snow page on the wiki? it mostly lists what is working with 4.1

07:45 <ariellea> Wizzup: I'll check if I archived the logs, armsoc said it couldn't find EXA

07:45 <Wizzup> I have fbdev, modesetting and fbturbo working

07:46 <Wizzup> Using modesetting atm

07:46 <Wizzup> on 4.1.0-rc8

07:46 <ariellea> hmm, weird. I'll reboot later into it and archive away the logs.

07:47 <ariellea> actually I'll do it now. bbiab

08:03 <ariellea> Wizzup: http://pastebin.com/0u56hS1B

08:03 <ariellea> Wizzup: that is with armsoc driver

08:05 <ariellea> fbdev complained about no extended edid data on console, but didn't put up a display.

08:06 <Wizzup> can you try xf86-video-modesetting

08:07 <Wizzup> with no configuration for the display

08:08 <ariellea> so no display block in the xorg.config and the device driver is 'modesetting' ?

08:09 <Wizzup> I don't specify any driver and it defaults to modesetting.

08:09 <ariellea> ok

08:09 <Wizzup> The only configs in xorg.conf.d are for synaptics and wacom

08:12 <ariellea> lol I am on monolithic conf file for xorg, I'll leave the touchpad driver enabled.

08:31 <ariellea> Wizzup: modesetting works thanks, in both 3.8.11 and 4.1.1. Now I need to make a new kernel with adequate wifi, lol

08:32 <ariellea> Once I get wifi I'll do a full hardware test in 4.1.1 and see what works.

08:32 <Wizzup> You need the wifi as module

08:32 <Wizzup> er, no

08:32 <Wizzup> disregard ne

08:32 <Wizzup> me

08:32 <Wizzup> You need to enable the fw fallback

08:32 <Wizzup> I thought I mentioned that on the wiki

08:33 <ariellea> yeah I enabled that, but didn't recompile

08:33 <Wizzup> $ zgrep FALLBACK /proc/config.gz

08:33 <Wizzup> CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y

08:33 <Wizzup> ack.

08:33 <Wizzup> good luck.

08:33 <Wizzup> back later.

08:33 <ariellea> thanks :)

11:29 <ariellea> Wizzup: 4.1.1 works with X, thanks for the help. I'll go through all my devices and see what is working or not.

11:32 <Wizzup> ariellea: :)

11:49 <ariellea> audio isn't working, but I read on the channel log that seems to be outstanding.

11:53 <Wizzup> yes

13:49 <ariellea> nice my usb3 hdd works in 4.1.1

13:50 <ariellea> webcam isn't working which is a shame

13:51 <Wizzup> not yet

13:51 <Wizzup> do you use the cam?

13:52 <ariellea> not often

15:13 <ariellea> so the cam isn't detected. is that likely to be a power problem as I thought it was a usb device?

15:50 <Wizzup> ariellea: yes

15:50 <Wizzup> ariellea: see the log

15:50 <Wizzup> we also discussed the log

16:00 <ariellea> how many days ago approx?

17:26 <Wizzup> just search for 'cam'

17:26 <Wizzup> probably a week or so

17:27 <si1v3r> I think the camera is working on mine. I enabled all the multimedia drivers.

17:27 <Wizzup> on snow??

17:27 <Wizzup> It doesn't even show on lsusb on snow

17:27 <Wizzup> peach-pi/peach-pit may work

17:27 <si1v3r> No I mean I had to compile a bunch of additional modules

17:28 <si1v3r> then /dev/video1 and /dev/video0 showed up.

17:28 <Wizzup> si1v3r: but it is not *SEEN* on the usb bus

17:28 <si1v3r> I didn't test with a ciewer

17:28 <Wizzup> So it's not a driver problem, it's just never brought up

17:28 <Wizzup> If you see some /dev/video it may be the mfc

17:28 <si1v3r> I figured it was directly connected to the SOC like a phone or a raspi.

17:28 <Wizzup> not afaik

18:07 <sjoerd> it's on usb indeed

18:07 <sjoerd> but you need to turn on its power to make it appear

18:08 <ariellea> I don't see any /dev/video files on my system :(

20:00 <Wizzup> si1v3r: on snow?

20:03 <si1v3r> No I don't have a snow anymore.

21:21 <ariellea> gn all