13:38 <JBD1986> All, I've seen an issue where having a high draw USB device connected to my mx6 device at boot can prevent the wlan0 chip from initializing. It's a wl1273 chip. I was wondering if there was a way I could gracefully reinitialize the wlan interface via the command line if this happens?

13:38 <JBD1986> NOTE: I do not have a pmic regulator for wl1273 power

19:26 <hste_> jas-hacks: have u played with imx6 lately?

19:30 <jas-hacks> hste_: hi, was busy with getting dvb-t usb stick working with gstreamer-imx + building android

19:32 <hste_> jas-hacks: did u get it to work?

19:32 <jas-hacks> hste_: dvb-t stick works

19:33 <hste_> What kernel do u use?

19:33 <jas-hacks> hste_: 3.10

19:35 <hste_> jas-hacks: nice. What imx6 dev r u hacking on?

19:37 <jas-hacks> hste_: have 5 boards to choose from

19:37 <hste_> :)

19:58 <victhor> using the dvb-t stick as what it's supposed to do or as a sdr?

20:10 <jas-hacks> victhor: TV not sdr (yet !)

20:12 <victhor> this is the first time I see those being used for TV :P

20:15 <Tenkawa> any of you still using the gk802?

20:15 <Tenkawa> I'm trying to get the 3.10.17 kernel working and not having any success

20:16 <hste_> Tenkawa: I have one, and its working with 3,10.17

20:17 <Tenkawa> hste_: first thing I ran into os no loadaddr with make uimage

20:17 <Tenkawa> tried using the one from my 3.0.35 kernel and it just doesnt boot

20:17 <Tenkawa> I have to be missing something simple

20:17 <Tenkawa> er os/is

20:18 <hste_> Tenkawa: I used another uboot with support for dts

20:18 <Tenkawa> doh

20:18 <Tenkawa> thats a good point

20:18 <Tenkawa> the devicetree

20:18 <Tenkawa> hste_: got a link for that uboot?

20:19 <Tenkawa> I thought it might be something with the dtb however wasnt sure

20:19 <hste_> Tenkawa: U can look into my installerscript http://stende.no-ip.info/imx6/gk802/3.10.17_1.0.0/scripts/mk_jessie-lxde_gk802.sh

20:19 <Tenkawa> ok will do thanks

20:20 <Tenkawa> is the onboard 81932cu broke in 3.10?

20:20 <Tenkawa> er 8192cu

20:26 <Tenkawa> hste_: thanks again

20:29 <hste_> Tenkawa: I have a kernel based on the new alpha that should have the 8192cu http://stende.no-ip.info/imx6/kernel-3.10.31-mix.tar.xz

20:30 <hste_> Tenkawa: Or if u want to compile http://stende.no-ip.info/imx6/3.10.31_1.1.0_alpha_mix_oldvivante.tar.xz

20:30 <Tenkawa> is there anything actually wrong with trying to compile the 8192cu in with .17 or isd it just broke?

20:31 <Tenkawa> trying to avoid adding more physical pieces if possible heheheh

20:31 <hste_> Tenkawa: it needed a patch to compile it for 3.10

20:31 <Tenkawa> to compile or to work?

20:32 <Tenkawa> because it "did" compile for me

20:33 <Tenkawa> win 4

20:33 <Tenkawa> oops

20:34 <Tenkawa> too bad theres no mainstream 3.14 support

20:34 <Tenkawa> heheh

20:34 <hste_> Tenkawa: to compile. the rtl8192 driver is compiling, but the one from realtek will not work without this https://github.com/dz0ny/rt8192cu

20:35 <Tenkawa> ah

20:35 <Tenkawa> let me go take a look at that then

20:35 <hste_> Tenkawa: but my wifi is broke so I dont know what works and not

20:35 <Tenkawa> ahhhh

20:35 <Tenkawa> ouch

20:36 <Tenkawa> at this point I'll be happy with just booting

20:36 <Tenkawa> I "can" add a usb wifi if needed

20:39 <Tenkawa> well.. time to try it...

20:42 <Tenkawa> ok.. here goes attempt 1

20:44 <Tenkawa> well u-boot screen shows up

20:44 <Tenkawa> thats about it atm

20:45 <Tenkawa> it needs a fat fs to boot from doesnt it?

20:45 <Tenkawa> for the kernel and such

20:46 <Tenkawa> oh well.. got to get ready to leave for now anyway. Thanks for pointing me in the right direction