<Wizzup>
I went from 4.2.2 to 4.4.1 and now my gpg card doesn't seem to work anymore. Works on 4.2.2 (when I go back), but not on 4.4.1. Very odd, config is pretty much identical.
<Wizzup>
Low level debugging in pcscd doesn't seem to show much. Hmm..
<rsv>
Wizzup: apologies for asking too many... xu3 uses 3.10. do we have a kernel something close to that
<Wizzup>
rsv: idle here and see if someone knows, or look at the xu3 device tree
<rsv>
okay, Wizzup: does suspend-resume work. power management works on peach-pi?
<Wizzup>
it works on peach-pi, mostly
<Wizzup>
I'm going to restaurant now. Will be mostly afk
<rsv>
thanks man
<LiquidAcid>
rsv, afaik nothing of thagt works on the xu3
<rsv>
LiquidAcid: yes, it does not
<rsv>
LiquidAcid: are you aware of any kernel i can use for xu3 other than odroid's
<LiquidAcid>
rsv, iirc the bootloader is partly to blame for that
<rsv>
LiquidAcid: for aht?
<rsv>
*for what?
<LiquidAcid>
power management, suspend/resume
<LiquidAcid>
i think bgamari knows more about that
<rsv>
LiquidAcid: i am trying to mix and match to see if it works
<LiquidAcid>
rsv, you mean 3.10 and 4.5?
<rsv>
LiquidAcid: i have 3.10. i am checking if i can find something works atleast
<rsv>
to start with
<rsv>
LiquidAcid: i am not sure if it is the bootloader.
<LiquidAcid>
rsv, afaik 4.4.y should boot with upstream uboot
<rsv>
i am unable to put power domains to off
<LiquidAcid>
then leave the domains on
<rsv>
LiquidAcid: they consume power
<LiquidAcid>
and?
<LiquidAcid>
like i said, the current bootloader makes it impossible to have proper power management anyway
<LiquidAcid>
if power consumption is a thing, then the xu3 is probably the wrong board anyway
<rsv>
LiquidAcid: i have a bootloader that comes with xyref board and the results are the same. what i am trying to say is it is not just the bootloader
<LiquidAcid>
rsv, define bootloader
<LiquidAcid>
i refer to bl1/bl2
<LiquidAcid>
i don't talk about u-boot
<rsv>
okay
<rsv>
LiquidAcid: can you just tell me why you think it is a bl1/bl2 problem
<rsv>
i dont know what i am missing here
<LiquidAcid>
rsv, it's not me that thinks this
<rsv>
LiquidAcid: you were referring to a 4.5 kernel. is it in hardkernel repo
<LiquidAcid>
rsv, no, i meant mainline 4.5-rc3
<rsv>
LiquidAcid: i was going through the dts file in the mainline. i am not seeing any references to power domains