01:18 <xdarklight> narmstrong: have you seen problems on boards with both, CVBS and HDMI enabled?

01:20 <xdarklight> I'm seeing strange behavior here. modetest output: https://pastebin.com/DK24YW61

01:20 <xdarklight> when I run kmscube or glmark2-es-drm I get a mode_set event which requests switching to 720x576i

01:21 <xdarklight> then I drop all CVBS stuff from the board.dts (that's the only thing I modify) and then it doesn't magically want to switch to 720x576i anymore - instead it just keeps at the resolution set during boot (1920x1200 for my monitor)

02:36 <chewitt> xdarklight narmstrong I have two video output problems

02:37 <chewitt> first, a user report in our forums from the 512MB version of LaFrite where the user has no output at all

02:38 <chewitt> second, I did some c/p to create mainline u-boot support for WeTek Hub/Play2 (both S905)

02:39 <chewitt> the 1GB Hub boots fine until Kodi starts, then loses HDMI output

02:39 <chewitt> the 2GB Play2 has no issues, works really well

02:40 <chewitt> I doctored device-tree to remove the CVBS nodes from Hub (as it only has HDMI output) but no difference

02:42 <chewitt> no issues when using bsp u-boot on the device

02:43 <chewitt> martin's description about kmscube .. sounds kind of similar

12:01 <narmstrong> xdarklight: yes, kmscube mode select is buggy, it select the first connnected connector, without finding if a connector is already connected to a crtc

12:02 <narmstrong> chewitt: ask the monitor type, lafrite doesn't support 4k, I need to push a fix upstream to disable 4k on S805X

12:04 <chewitt> question asked..

12:26 <xdarklight> narmstrong: ah, I see. what is your testing process then (do you run wayland/X)?

12:28 <narmstrong> xdarklight: X and wayland selects HDMI correctly

12:28 <narmstrong> usually I disable cvbs when I need to have exclusive HDMI

12:41 <narmstrong> xdarklight: in the latest kmscube you can specify the video mode

12:41 <narmstrong> this could help

12:47 <xdarklight> narmstrong: I already have the latest kmscube and when I specify the video mode it says that it's unsupported. turns out that it uses the CVBS connector to check if 1920x1200 is supported (obviously it doesn't)

12:47 <xdarklight> it's a good excuse to play with wayland/weston - thanks :)

12:48 <narmstrong> xdarklight: did you push all your hacks on the your integration tree ?

12:49 <xdarklight> yep. I was able to sort out most related to the meson DRM driver (the big TODO that's left is video clocks)

12:52 <xdarklight> it should(tm) work on Odroid-C1 for you if you run "video dev open 1080P" in u-boot before you boot Linux

12:55 <narmstrong> oki