03:57 <Oksana> What is happening with the devices donated by Mozilla?..

04:27 <wpwrak> i think most are collecting dust ... which is a very good state for them to be in at the moment :)

04:29 <wpwrak> in the sense that we'll want them to be ready and available when we want to start doing bad things to them

04:34 <Oksana> :-)

05:30 <Sicelo> Mozilla donated to Neo900?

05:31 <Sicelo> ah i see now

05:32 <Sicelo> where did Mozilla obtain these N900 from?

10:49 <ShadowJK> Mozilla also had N810s, iirc

10:50 <ShadowJK> iirc when Nokia was supporting Mozilla's mobile effort, they'd give mozilla plenty of devices

12:32 <P-G> That's a pretty awesome chain of donations. :)

15:08 <DocScrutinizer05> freemangordon: you happen to be able to suggest a useful SYSBOOT config particularly for the OneNAND detection?

16:08 <Sicelo> thanx for clarification ShadowJK :)

17:30 <DocScrutinizer05> freemangordon: does SYS_BOOT[5:9]=0b?10000, with "?" = hw-button/default:0 sound good to you?

17:31 <DocScrutinizer05> freemangordon: does SYS_BOOT[5:0]=0b?10000, with "?" = hw-button/default:0 sound good to you?

17:32 <DocScrutinizer05> sys_boot5=0: sys_boot[4:0]=0b10000 --> OneNAND USB UART3 MMC1

17:34 <DocScrutinizer05> sys_boot5=1: sys_boot[4:0]=0b10000 --> USB UART3 MMC1 OneNAND

17:39 <DocScrutinizer05> which would mean: as long as there's a working xLoader on OneNAND and no hw-button pressed, the device will boot from OneNAND. When pressing hw-button during plugging in USB/powering-up, the device will try to boot from USB UART3 MMC1 before it fals back to OneNAND

17:40 <DocScrutinizer05> NB that this is only relevant for xLoader/MLO. AIUI xLoader is free to decide on its own where from to load uBoot

18:14 <freemangordon> DocScrutinizer05: sound good

18:14 <freemangordon> *sounds

18:59 <DocScrutinizer05> freemangordon: Pali: I stand corrected: >>I2C1/2/ -- The **fourth** HS I2C4 controller (I2C4) is in the power, reset, and clock management (PRCM) module to perforam dynamic voltage control and power sequencing.<< SPRUGN4R p.196

19:00 <DocScrutinizer05> oops, sorry, I2C1/2/3

19:01 <DocScrutinizer05> so indeed this is even more a conflict to /dev/* pragma origin=0

21:33 <DocScrutinizer05> I'm still undecided which "sensor" (as opposed to "actor") coll: "switch" Neo900 shall use to enable coldflashing. Cam-focus, cam-trigger, batt cover magnetic sensor, cam-door sensor, vol+/-, kbd-slide, even a special "battery" with a short on BSI?

21:44 <Oksana> The most reliable and the least likely to break? Be it from fall, long use, sand, or something else...

21:59 <DocScrutinizer05> that's probably battery lid (hall switch) then