12:20 <SPG> lkcl master 8346667 rhombus allwinner/a20/boot/eoma68-a20-3.4-config * update * http://git.hands.com/?p=rhombus.git;a=commitdiff;h=8346667

12:20 <SPG> lkcl master 3cf4b19 rhombus community_ideas/games_console.mdwn * whoops forgot to tag games console * http://git.hands.com/?p=rhombus.git;a=commitdiff;h=3cf4b19

12:20 <SPG> lkcl master 97d92c7 rhombus community_ideas/ssd_ip_camera.mdwn * add tag to ssd ip camera page * http://git.hands.com/?p=rhombus.git;a=commitdiff;h=97d92c7

13:19 <lkcl_> oo niiice.... :)

13:21 <lkcl_> jelly-home: yes. i'm waiting for him to finish and release the design of the casework, then create an I/O board to match.

13:22 <lkcl_> keebler: irony. the only match that comes up with HF0318-T803 is.... the irc logs for this discussion :)

13:22 <lkcl_> HF0318 on its own looks like it's a XTAL (4mm x 11mm)

13:24 <SPG> lkcl master 48542a5 rhombus community_ideas/kde_tablet/ news.html pcb.mdwn * flying squirrel status update * http://git.hands.com/?p=rhombus.git;a=commitdiff;h=48542a5

13:45 <keebler> lkcl_: Yeah, I got the same results.

13:46 <keebler> lkcl_: I need to desolder the shielding to get at the controller.

13:51 <lkcl_> keebler: ack. good luck :)

13:55 <keebler> yeah, not gonna happen. :P

13:55 <keebler> I don't have time

13:56 <keebler> and I NEED it usable. Even if that means my EOMA laptop won't have a webcam (although I am fairly certain I can get it working eventually.)

13:56 <SPG> lkcl master e374e12 rhombus community_ideas/kde_tablet/pcb.mdwn * link to mxc6225 controller daemon * http://git.hands.com/?p=rhombus.git;a=commitdiff;h=e374e12

13:59 <keebler> That, and my S.O. is getting antsy with a hundred parts strewn across her grandmother's buffet.

20:16 <lkcl_> keebler: well... the simplest way is "lsusb" - that'd do the trick!

20:17 <lkcl_> ahh... loovely. yes. i have _two_ tables... no, 3... wait... 3 tables and a make-shift bench covered in electronics. ah... and another 18in high bench for soldering :)

20:17 <lkcl_> but they're all upstairs

20:40 <focus_it> got Ubuntu 13.04 desktop linuk working on eoma: http://www.gplsquared.com/eoma_boot/eoma_boot.html#Ubuntu_13_04

20:40 <lkcl_> focus_it: yay good stuff

20:44 <focus_it> lkcl_: easy now to make netbooks with low price budget

20:47 <lkcl_> focus_it: gimme!!!

20:48 <lkcl_> mine!

20:48 <lkcl_> :)

20:48 <lkcl_> it was after all the whole bloody point of the arm-netbooks mailing list. like.

20:48 <lkcl_> y'know?

20:48 <lkcl_> the name kinda gives it away? :)

21:02 <focus_it> lkcl_: seriously you need to get a batch of 25 old eomas out - i'm facing extinction here unless i have boards in hand to demo - e.g. nearly told to go and use cubies *only*

21:50 <keebler> lkcl_: while I'm positive that the camera is USB, I've been running over all the available ports and the 7port hub is already fully utilized by all the other devices on the board, so I'm not sure HOW the webcam is getting out to the EOMA/Phone yet... Then again, I haven't had the time to desilder the cable and add the exentsion yet.

21:51 <keebler> Just dropped 200 today on an mSATA 128GB SSD and 4 DISK Disc Array Enclosure/JBOD/RAID 0,1,5,10, based on the SI3132 port multiplier.

21:51 <keebler> To test the EOMA card with.

21:51 <keebler> It arrives on Friday.

21:52 <keebler> desolder

22:13 <focus_it> lkcl_: next target working 24 bit lcd. got any working lcd kernels & script.fex's lying around - nothing is cooperating at the moment - and i can tell if its kernel settings or script.fex - so i need someone to give me known working script.fex that is operating a 24 bit lcd

22:13 <focus_it> i meant i can't tell