16:02 <_whitenotifier-f> [glasgow] whitequark commented on issue #204: Don't rely on argparse's internal API - https://git.io/JUubs

16:05 <_whitenotifier-f> [glasgow] whitequark commented on issue #202: Benchmark results never gets reported - https://git.io/JUubW

19:05 <electronic_eel> esden: I think attie has a point with the height of the serial no box. 6mm label tape is very common.

19:06 <electronic_eel> I just checked and we could increase the height of the silkscreen box to about 6.3mm without hitting any obstacles or having it look ugly

19:07 <electronic_eel> IIRC you still have some unfinished changes in your repo, so I won't check this in without an ok by you. this should be easy, so you could also do it

19:12 <_whitenotifier-f> [glasgow] DurandA commented on issue #204: Don't rely on argparse's internal API - https://git.io/JUzv9

19:39 <d1b2> <Attie> not sure if you want to try to accommodate a 25mm width too, or how common that is as a min length

19:40 <d1b2> <Attie> actually, it's also possible that "chain printing" may affect that dimension too, I'll try to check when I'm back at it

19:41 <d1b2> <Attie> I don't remember if revC2 has a J10, or if it's in the same position...

19:41 <electronic_eel> I think we can't do much with the length, as it would either hang off the board edge or cross the aux pads

19:41 <electronic_eel> the aux pads are in the same position

19:43 <d1b2> <Attie> ah, ok

19:44 <_whitenotifier-f> [glasgow] FFY00 commented on issue #204: Don't rely on argparse's internal API - https://git.io/JUzJO

19:45 <gruetzkopf> at least my brother tz labler happily spits out 12mm cuts

21:00 <d1b2> <Attie> gruetzkopf - nice... mind if i ask what model number you have?

21:01 <d1b2> <Attie> I've just tried "chain printing" with my PT-P700, and 25mm is still the shortest