02:52 <brads> some questions running mainline uboot/linux (2019.01-ge5fd39c-dirty / 5.0.0-rc5)

02:53 <brads> Odroid C2 board

02:57 <brads> first an old hs200 16Gb emmc seems to work fine but new hs400 fails to boot informing that cannot change voltage. Seems to work fine in 4.20 and mainline uboot.

03:01 <brads> 2) regulator warnings on boot for usb which taint the kernel '[ 3.745437] WARNING: CPU: 2 PID: 21 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8"

03:06 <brads> 3) it seems enabling UHS modes in uboot for sd cards prevents linux from detecting the card (similar to the booloader issue on reboots)

03:10 <brads> 4) in just uboot environment no HDMI display (probably missing something here in the config) but with cec enabled I found an issue. Each time I turn on my tv about 10 seconds later the C2 pulls focus via cec

03:17 <brads> it seems 1 & 2 are related to 5.0.0-rc5 over 4.20.0-rc6

08:21 <brads> Here is a bootlog of the 5.0.0-rc5 boot when hs400 emmc fails https://pastebin.com/DVxGzrEa It found the sd card and booted the rootfs on sd instead

08:22 <brads> Tried with armbian boot.src and manual uboot5 config config

08:24 <brads> my test uboot script is here https://pastebin.com/hpmRuuzp

15:22 <warpme_> markk_: I’m courious what opengl/openmax combination is supported currently by render2019? I give run for: rpi3 aarch64 with current mesa (18.3.3) and qt5.12.0 compiled for gles. It plays but screen is black&white. Then I tried rpi2 armv7 with rpi gles blobs + and qt5.12.0 compiled for eglfs. Screen is all white. Also I was trying compile aarch64 with mesa18.3.3 + rpi blobs for openmax - but compile fails with error....

16:01 <warpme_> oops: sorry. wrong window!