06:10 <tuxd3v> anyone here succeeded doing iperf tests on lan port for nanopi r2s, without breaks or hangs?

08:36 <q4a> Hi, I would like to adjust this patch for latest kernel - https://patchwork.kernel.org/project/linux-rockchip/patch/20200108210740.28769-13-jonas@kwiboo.se/

08:37 <q4a> Kwiboo are you here? Can you help me?

08:39 <q4a> This patch made for `dw_hdmi_rockchip_mode_valid(struct drm_connector *connector,` and now there is only `struct dw_hdmi *hdmi, void *data,` and `const struct drm_display_info *info,` parameters

08:39 <q4a> https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c#L223

08:40 <q4a> I thied to get connector with `struct drm_connector *connector = &hdmi->connector;` - but got error `drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c:224:41: error: dereferencing pointer to incomplete type ‘struct dw_hdmi’`

08:43 <q4a> And yes dw_hdmi - is not defined in dw_hdmi-rockchip.c - only here https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c#L143

11:03 <dvergatal> hi all i am using rockchip buildroot and i have switched from sysv init to systemd and i have discovered that adbd on systemd is malfunctioning

11:05 <dvergatal> there is sysv init script /etc/init.d/S50usbdevice which is starting and when i plug the device it all works but if when it will be unplugged from my host than adbd server is somehow being killed

11:17 <Kwiboo> q4a: https://github.com/Kwiboo/linux-rockchip/compare/v5.10.1...v5.10.1-drm-rockchip and v5.10.1-inno-htmi-phy has the "latest" patches rebased on v5.10.1, unsure if they compile as-is, but they should enable up to 4k@30hz on rk3288/rk3328/rk3399, possible rk3399 will list some modes that will generated no-signal due to vpll clock rate being changed (vpll is used as hdmi phy input

11:17 <Kwiboo> clock)

11:23 <Kwiboo> q4a: the patches for 420 and 10-bit output mode has not been updated/rebased yet

12:50 <q4a> Thanks!

15:04 <indy> \o/ connected to jtag on rk3308 while running uboot

15:07 <dvergatal> Kwiboo: you are porting 5.10 to rockchip?

22:46 <tuxd3v> I am with a problem on nanopi r2s on lan( usb-to-ethernet 8253b adapter ) port:

22:46 <tuxd3v> this is my dmesg of the problem:

22:46 <tuxd3v> https://paste.debian.net/1177187/

22:50 <tuxd3v> it hapens when I for example am doing iperf tests, like this:

22:50 <tuxd3v> https://paste.debian.net/1177190/

22:50 <tuxd3v> during large amounts of time the port doesn't transmit data

22:51 <tuxd3v> when at 0Mbit/sec, it rizes those errors on dmesg

22:54 <tuxd3v> Also the buffers for rx/tx of the nic are unavailable, ethtool reports this:

22:54 <tuxd3v> https://paste.debian.net/1177192/

22:54 <tuxd3v> does any one has some lead on how to fix the usb-to-ethernet port on nano pi r2s?

22:54 <tuxd3v> thanks in advance