Turl changed the topic of #linux-sunxi to: Allwinner/sunxi /development discussion - did you try looking at our wiki? https://linux-sunxi.org - Don't ask to ask. Just ask and wait! - https://github.com/linux-sunxi/ - Logs at http://irclog.whitequark.org/linux-sunxi
ErwinH has quit [Ping timeout: 268 seconds]
ErwinH has joined #linux-sunxi
florianH has quit [Quit: Connection closed for inactivity]
\\Mr_C\\ has quit [Quit: .]
ErwinH has quit [Ping timeout: 268 seconds]
<igraltist> hi
<igraltist> does the u-boot already boot the A20 from sata?
<apritzel> igraltist: you mean loading kernels from SATA? It does that for ages
<igraltist> yes
<jernej> but you cannot put bootloader to sata, if I'm not mistaken, so you still need some additional storage
<apritzel> but U-Boot itself has to come from some other media, SD card normally
<apritzel> ;-)
<igraltist> ah sorry for not exactly describe
<jernej> that is HW limitation
<jernej> but you can workaround it with SPI flash chip usually
ErwinH has joined #linux-sunxi
<apritzel> though I think most boards don't even expose the right pins on headers
<apritzel> but if your board has SPI flash soldered, then that would be possible (and awesome)
<jernej> that's a shame, I hope it will get more widespread
<igraltist> i have a cubietruck, i was only wondering why the boot the kernel took now so long
<igraltist> i was thinking maybe scanning the sata
ErwinH has quit [Ping timeout: 255 seconds]
<apritzel> igraltist: what does take long? Loading U-Boot? Loading the kernel from SD card? Booting into Linux with rootfs on SD card?
<igraltist> loading the kernel now
<igraltist> its write to console read boot.scr and then more then 10 sec
<jernej> then I guess it depends on what is in that script
<igraltist> its nothing change a lot then the last 2 years
<jernej> and that is usually distro related question
ErwinH has joined #linux-sunxi
<igraltist> i build may own boot.scr so thatswhy i know its was not changing
<jernej> you can always try to find the reason with git bisect, but that may take some time
leio has quit [Ping timeout: 260 seconds]
ErwinH has quit [Ping timeout: 255 seconds]
<igraltist> its not so important, the cubietruck in normal case just running
<ssvb> jernej: Olimex people said that the next revision of their A20 Lime board will have SPI flash
<jernej> nice
ErwinH has joined #linux-sunxi
vishnup has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
yann has quit [Ping timeout: 260 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
ErwinH has joined #linux-sunxi
wzyy2 has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
[Awaxx] has quit [Quit: FEAR]
leio has joined #linux-sunxi
vishnup has quit [Ping timeout: 260 seconds]
ErwinH has joined #linux-sunxi
[Awaxx] has joined #linux-sunxi
ErwinH has quit [Ping timeout: 255 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 240 seconds]
jernej has quit [Ping timeout: 240 seconds]
leio has quit [Remote host closed the connection]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 255 seconds]
ErwinH has joined #linux-sunxi
popolon has quit [Quit: WeeChat 1.4]
cnxsoft has joined #linux-sunxi
ErwinH has quit [Ping timeout: 240 seconds]
apritzel has quit [Quit: Leaving.]
lurchi_ is now known as lurchi__
lurchi__ is now known as lurchi_
Andy-D has quit [Ping timeout: 240 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 240 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
sgteem_ has joined #linux-sunxi
sgteem has quit [Ping timeout: 268 seconds]
ErwinH has joined #linux-sunxi
egbert has quit [Disconnected by services]
egbert has joined #linux-sunxi
ErwinH has quit [Ping timeout: 240 seconds]
swiftgeek has joined #linux-sunxi
ErwinH has joined #linux-sunxi
ninolein has joined #linux-sunxi
ErwinH has quit [Ping timeout: 255 seconds]
ninolein_ has quit [Ping timeout: 240 seconds]
wens has quit [Ping timeout: 252 seconds]
ErwinH has joined #linux-sunxi
wens has joined #linux-sunxi
leviathan has joined #linux-sunxi
ErwinH has quit [Ping timeout: 240 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 240 seconds]
victhor has joined #linux-sunxi
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 268 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 255 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 240 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
swiftgeek has quit [Read error: Connection reset by peer]
swiftgeek has joined #linux-sunxi
lurchi_ is now known as lurchi__
ErwinH has joined #linux-sunxi
victhor has quit [Ping timeout: 268 seconds]
ErwinH has quit [Ping timeout: 240 seconds]
stoned0651 has quit [Quit: Page closed]
johny_ has joined #linux-sunxi
<johny_> Hi Wens. I am trying to get the audio recording to work on nanopi M1, but it gives me error "arecord: pcm_read:2032: read error: Input/output error". Playback however seems to be fine
ErwinH has joined #linux-sunxi
<johny_> Please can you point me to a related patch.
ErwinH has quit [Ping timeout: 260 seconds]
swiftgeek has quit [Read error: Connection reset by peer]
swiftgeek has joined #linux-sunxi
<wens> check if your capture controls are enabled in alsamixer
ErwinH has joined #linux-sunxi
<johny_> this is how my alsamixer looks for capture https://uploadpie.com/tyZLw6
ErwinH has quit [Ping timeout: 260 seconds]
<johny_> indeed it was turned off. sorry
<johny_> my bad.
<johny_> Thanks for pointing it out though!
ErwinH has joined #linux-sunxi
chomwitt has quit [Quit: WeeChat 1.0.1]
ErwinH has quit [Ping timeout: 260 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
muvlon has joined #linux-sunxi
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 255 seconds]
ErwinH has joined #linux-sunxi
ErwinH has quit [Ping timeout: 255 seconds]
vishnup has joined #linux-sunxi
pg12 has quit [Ping timeout: 240 seconds]
ErwinH has joined #linux-sunxi
pg12 has joined #linux-sunxi
ErwinH has quit [Ping timeout: 260 seconds]
JohnDoe_71Rus has joined #linux-sunxi
TheSeven has quit [Ping timeout: 240 seconds]
TheSeven has joined #linux-sunxi
arete74 has quit [Ping timeout: 260 seconds]
lurchi__ has quit [Read error: Connection reset by peer]
lurchi_ has joined #linux-sunxi
lurchi_ is now known as lurchi__
arete74 has joined #linux-sunxi
<walkiry> montjoie: The security system RSA mode works on the A64. The data should be presented in a form of array of the key size (modulus, key, data) such as : [LSB....MSB] and the result will be return following the same pattern.
jonkerj_ is now known as jonkerj
IgorPec has joined #linux-sunxi
muvlon has quit [Ping timeout: 240 seconds]
tony___ has joined #linux-sunxi
f0xx has joined #linux-sunxi
<tony___> sdfsf
leviathan has quit [Read error: Connection reset by peer]
muvlon has joined #linux-sunxi
jernej has joined #linux-sunxi
walkiry has quit [Ping timeout: 260 seconds]
fkluknav has joined #linux-sunxi
IgorPec has quit [Ping timeout: 268 seconds]
jernej has quit [Ping timeout: 240 seconds]
walkiry has joined #linux-sunxi
clonak has joined #linux-sunxi
Andy-D has joined #linux-sunxi
<MoeIcenowy> jernej: you can try to make TVE usable based on my patchset
<MoeIcenowy> you will need to slightly change the clock code of TVE driver (a new compatible for H3 is needed)
<MoeIcenowy> and then make a channel1-only tcon (make its compatible as sun8i-h3-tcon1)
<MoeIcenowy> then connect them ;-)
<MoeIcenowy> with mixer 1
<montjoie> walkiry: thanks I will try to update the CE driver with those informations
<walkiry> montjoie: no problem, this crypto engine is a pain in the ***
<walkiry> montjoie: hope it helps :)
r1mikey has joined #linux-sunxi
r1mikey has quit [Remote host closed the connection]
r1mikey has joined #linux-sunxi
tony___ has quit [Ping timeout: 260 seconds]
<montjoie> the pain is the lack of documentation (and its speed)
Gerwin_J has joined #linux-sunxi
walkiry has quit [Quit: Ex-Chat]
fkluknav has quit [Remote host closed the connection]
fkluknav has joined #linux-sunxi
IgorPec has joined #linux-sunxi
walkiry has joined #linux-sunxi
fl_0 has quit [Quit: STRG + Q]
BenG83_PB has quit [Quit: Leaving]
florianH has joined #linux-sunxi
msevwork has joined #linux-sunxi
fl_0 has joined #linux-sunxi
Andy-D has quit [Ping timeout: 260 seconds]
clonak_ has joined #linux-sunxi
KotCzarny has quit [Ping timeout: 264 seconds]
clonak has quit [Ping timeout: 252 seconds]
paulk-collins has joined #linux-sunxi
clonak_ has quit [Ping timeout: 240 seconds]
<montjoie> MoeIcenowy: init phy early is harder than I think:(
clonak has joined #linux-sunxi
lemonzest has joined #linux-sunxi
komunista has joined #linux-sunxi
KotCzarny has joined #linux-sunxi
f0xx has quit [Ping timeout: 268 seconds]
BenG83 has joined #linux-sunxi
clonak_ has joined #linux-sunxi
clonak has quit [Ping timeout: 252 seconds]
yann has joined #linux-sunxi
reinforce has joined #linux-sunxi
leviathancn has joined #linux-sunxi
cnxsoft has quit [Read error: Connection reset by peer]
r1mikey has quit [Ping timeout: 240 seconds]
r1mikey has joined #linux-sunxi
apritzel has joined #linux-sunxi
<apritzel> MoeIcenowy: does your Pinebook have still DDR3L and *not* LPDDR3?
cnxsoft has joined #linux-sunxi
<dan0_0> So are Xunlong's specs wrong on the OrangePi+ 2e? Cause their site & the wiki have it as being 108mm x 67mm, but it measures as 93mm x 60mm when I measure it
<dan0_0> And the case on Thingiverse measures to the same dimensions as what I measured.
<MoeIcenowy> apritzel: yes current one still DDR3L
r1mikey has quit [Ping timeout: 255 seconds]
IgorPec has quit [Quit: Nettalk6 - www.ntalk.de]
<BenG83> he has the same PCB rev as the rest of the prototypes
IgorPec has joined #linux-sunxi
<BenG83> question, where can I mention ayufan´s/longsleep
<BenG83> ´s current work based on the BSP for the wiki page?
<BenG83> does that go under See also -> ?
<MoeIcenowy> Modified BSP
<BenG83> because the template says Do not put non-sunxi images here, they should live under See also.
<BenG83> MoeIcenowy, did Tl give you a new SoPine as well?
<BenG83> that has LPDDR3
<MoeIcenowy> he says he will mail me one
<BenG83> ok
<BenG83> I gave mine away to a guy who wanted to make a custom board
<BenG83> but I have an early prototype still
<apritzel> BenG83: but all SoPines have LPDDR3, right?
<BenG83> yes
<apritzel> even the early ones?
<apritzel> I got mine in August
<BenG83> the early ones dont have SPI Flash and eMMC
<apritzel> right
<BenG83> probably should start a wiki page for that as well...
clonak_ is now known as clonak
<apritzel> BenG83: can you fill some gaps in the Pinebook page, mostly "Adding a serial port", maybe "Device disassembly" ?
<BenG83> adding serial port for the prototype boards now
<BenG83> just added silkscreen prints
<apritzel> BenG83: thanks!
<apritzel> BenG83: so is there a spare internal USB port? (4 port hub - camera - HID - external port = 1?)
<BenG83> yes
<BenG83> I have to check if they got my advice to add testpads
<BenG83> because I wanted to mount a GPS inside
<BenG83> and there are not many accesible interfaces
<BenG83> the touchpad connector has I2C
<BenG83> so there is that :)
dave0x6d has quit [Quit: Connection closed for inactivity]
<MoeIcenowy> P.S. TL made a terrible error: he decided to mux UART with the USB at left
<MoeIcenowy> however, the USB at left is USB0, used for FEL
<BenG83> I know
<MoeIcenowy> I have told him yesterday
<BenG83> I told him as well, but by the time the desing was out of the door
<BenG83> I would just use the sdcard breakout for uart
<BenG83> but I am not sure if they could have added it to the right side
<BenG83> the FFC pinout is fixed I think
<BenG83> for the daughterboard
<BenG83> since that is more or less a standard part for that case
<MoeIcenowy> they can just switch left and right USB ;-)
<MoeIcenowy> thus the right USB become USB0 and the left become under HUB one
<BenG83> my initial suggestion was to multiplex with the headphone jack
<BenG83> thats what my TV has
<MoeIcenowy> and it's what Nexus do ;-)
<BenG83> but that is also on the daughterboard...
<apritzel> proper solution would be to have a mini USB connector with some FTDI UART converter
<MoeIcenowy> embedding a FTDI is something expensive, and will affect the model
<BenG83> yeah, but I can live with that, as long as I dont have to remove the PCB anymore to get to the testpads
Ntemis has joined #linux-sunxi
<BenG83> there is a little hole on the left side
<BenG83> I was considering mountin the FEL button behind that
<BenG83> so I can use a paper clip
<wens> multiplexed with usb is rockchip-like :p
<apritzel> BenG83: oh, so there is no FEL button?
<BenG83> the new PCB schematic has a FEL button
<MoeIcenowy> apritzel: no in current ver
<BenG83> I just dont know where they put it on the PCBs
<MoeIcenowy> the next ver have one, but needs disassebly to get the button ;-)
<apritzel> well, it's not a showstopper, since you can always use a magic FEL mode SD card
<BenG83> yeah I like that one
<apritzel> but that's annoying and a FEL button is much more convenient
<apritzel> I have a U-Boot patch which can turn any GPIO into a FEL button
<KotCzarny> and more buttons == more fun anyway
<KotCzarny> apritzel: yay! when will you post it?
<BenG83> I think the only GPIO accessiable from the outside would be the headphone jack switch?
<KotCzarny> and would it go in mainline uboot?
<MoeIcenowy> I now use the FEL card to enter FEL for PB
<apritzel> (the SPL checks this GPIO very early and then jumps to the magic FEL entry point, very much like this SD code would do)
<KotCzarny> apritzel, your idea is great sd card/slot saver
<apritzel> KotCzarny: whenever I get around to flush my ever growing U-Boot patch queue
alexxy has joined #linux-sunxi
<apritzel> I configured that button on the OrangePi PC2 for that
<KotCzarny> apritzel, those on gpio header would work too?
<apritzel> KotCzarny: ping me tonight
<apritzel> KotCzarny: yes, any GPIO
<KotCzarny> great
<apritzel> you just specify it in your config file
<KotCzarny> will do
<KotCzarny> it's a tremendously useful feature when developing something
<KotCzarny> i wonder if you could use some sid bit to make it switch behavior
<KotCzarny> ie. bit cleared == fel only on button pressed, otherwise normal boot, bit set == fel when button not pressed, normal boot otherwise
<BenG83> ah crap the HP-DET pin is not a GPIO
<BenG83> it´s a special audio codec pin
<BenG83> for now I just made a little breakout board for UART/FEL
<Ke> does it have msata?
<BenG83> no
<Ke> competition with chromebooks may be tough
<BenG83> it has onboard eMMC or sdcard
<BenG83> I dont think this will compete with chromebooks directly
enrico_ has joined #linux-sunxi
<apritzel> Ke: do you know the price tag of the Pinebook?
<Ke> no idea
<BenG83> the website says 89$ atm
<BenG83> but that is old info
<apritzel> indeed
<Ke> including case and display and battery?
<apritzel> wasn't it 80$ for 11" and 100$ for 14"?
<apritzel> Ke: the whole thing, not sure about the power adaptor
<Ke> if the power supply is some standard thing, it's not that bad
<BenG83> I just used a wallwart from the scrap box
<apritzel> so asking for mSATA is a bit cheeky ;-)
<Ke> especially USB-C would be nice, but probably not an option here
<BenG83> it has 3.4mm/1.3mm barrel plug
<BenG83> 5V/3A max
<Ke> BenG83: which voltage?
<Ke> yup
<apritzel> Ke: (recent) Allwinner SoCs don't have any of those interfaces
<Ke> 3A is a bit much
<apritzel> Ke: not for charging
<Ke> apritzel: yes, I know, though you could use it just for power
r1mikey has joined #linux-sunxi
<Ke> not sure how much a separate component for USB-c would cost
<BenG83> I think the biggest probelm there is that the case is generic
<BenG83> it is used for a lot of such devices
<BenG83> since making custom injection molds would probably blow up the price
<Ke> apritzel: but many generic small form factor power sources can't do that sort of current even though they could give that power with 12V
<Ke> mine can do 18W @ 12V
<BenG83> 5V/3A wallwarts are pretty common now because of SBCs
<BenG83> I found a new one on ebay for 5$
<Ke> but obviously making things super cheap has a cost
<apritzel> Ke: spot on
<BenG83> I like the big battery
<BenG83> 10Ah is nice
miasma has quit [Ping timeout: 240 seconds]
<BenG83> the Azpen was sold with 6Ah
<Ke> BenG83: what sort of battery life is it in practice?
<BenG83> no
<Ke> is it full day's work like on chromebooks
<jelle> I assume the pinebook also has no suspend
<BenG83> the stock Android got me about 5-6h of browsing
<jelle> *support
<jelle> oh android
<BenG83> BSP suspend works
<jelle> ohhhh suprising :O
<BenG83> some drivers need reloading
<BenG83> mainly the wifi and usb camera
<BenG83> ayufan´s Android 7 builds work nicely on the Pinebook
<BenG83> with suspend
<BenG83> with longsleep´s ubuntu image and the BSP kernel suspend almost works
<Ke> =o)
<BenG83> under Linux I get 3-4h atm
<apritzel> suspend is mostly not the problem, it's resume that is the challenge ;-)
<BenG83> yeah
<BenG83> the wifi dies because after resume the mmc controller lost the connection to the SDIO module
<BenG83> why the USB camera has a problem I dont know
<BenG83> rest seems to work
<BenG83> Android has more agressive power management
<jelle> yup
<BenG83> the LCD needs about 200mA for the panel and 200mA for the backlight
<BenG83> that is pretty significant
<BenG83> my experience from the Pine boards is that the A64 needs between 500-1500mA
<BenG83> but we dont have GbE here
<BenG83> so maybe a bit less
yann has quit [Ping timeout: 240 seconds]
<BenG83> so under full load maybe 2A with the LCD which leaves about 1A for charging
<BenG83> if nothing hungry is plugged to the USB ports
r1mikey has quit [Remote host closed the connection]
<apritzel> I was wondering if the PB should expose the 4th USB port from the hub internally, so people could hook up their favourite USB peripheral
<MoeIcenowy> you can suggest this to TL ;-)
<BenG83> I hope they at least added the testpads
r1mikey has joined #linux-sunxi
<apritzel> MoeIcenowy: isn't posting something in the channel one way to communicate with TL? :-D
<MoeIcenowy> oh seems ;-)
<BenG83> he usually reads the backlog
<MoeIcenowy> a pair of eyes behind the whitelogger ;-)
<apritzel> for a start people could just hook up a tiny USB pen drive and get more storage for cheap, also pretty fast (according to tkaiser)
swiftgeek has quit [Ping timeout: 240 seconds]
<BenG83> just looked at the schematics
<BenG83> Port1 - HID bridge
<apritzel> or connect some 4G USB adaptor and get mobile data access
<BenG83> Port2/4 - Daughterboard
<BenG83> Port3 - Camera
<BenG83> I have the daughterboard schematic somewhere...
<BenG83> ha I found a GPIO that is accessible from the outside, at least kind of
<BenG83> the hall sensor is just a GPIO
<BenG83> you could trigger FEL with a magnet
<BenG83> :)
<apritzel> BenG83: lol
<BenG83> since pressing power on with the lid closed is not an option
<BenG83> I used a magnet while fixing the BSP lid switch driver
<BenG83> there aren´t that many other options
<BenG83> no volume buttons
<apritzel> sounds like a common customer service question then: is there any magnet nearby?
<BenG83> heh
<BenG83> lukasz PB prototype was missing the magnets
<BenG83> took us a while to figure that out...
<BenG83> the open USB port is routed to the daughterboard
swiftgeek has joined #linux-sunxi
<BenG83> and if the PCIe card reader is not mounted
<BenG83> the lanes should end up at a capacitor footpring
<BenG83> if this is the correct schematic
<BenG83> so you can grab USB from there
<BenG83> *footprint
<BenG83> apritzel, I just found something else
<BenG83> the daughterboard has tespads for volume up/down which are routed to the KEYADC
<BenG83> but I still like the magnet better...
kelvan has quit [Remote host closed the connection]
kelvan has joined #linux-sunxi
f0xx has joined #linux-sunxi
wzyy2 has quit [Ping timeout: 240 seconds]
yann has joined #linux-sunxi
leio has joined #linux-sunxi
muvlon has quit [Remote host closed the connection]
muvlon has joined #linux-sunxi
rah has quit [Killed (Sigyn (Spam is off topic on freenode.))]
rah has joined #linux-sunxi
massi has joined #linux-sunxi
fl_0 has quit [Ping timeout: 260 seconds]
fl_0 has joined #linux-sunxi
Net147 has quit [Ping timeout: 268 seconds]
apritzel has left #linux-sunxi [#linux-sunxi]
Net147 has joined #linux-sunxi
wzyy2 has joined #linux-sunxi
victhor has joined #linux-sunxi
r1mikey has quit [Remote host closed the connection]
<MoeIcenowy> I now want a A64 board with directly RGB LCD output...
<MoeIcenowy> debugging display under a bridge is a disaster
<BenG83> I think the tespads are all there
<BenG83> on both sides of the bridge
r1mikey has joined #linux-sunxi
<oliv3r> while i'm sure it is a 'duh' for some, did we know toggeling ldo3/ldo4 off/on (via i2c in u-boot even) causes the PMIC to fail?
<oliv3r> wens: ^
<wens> i think there was some bug with ldo3/ldo4 that hangs the system?
<oliv3r> the 'fix' was to have u-boot turn on the LDO at boot (which is the default state anyway)
<oliv3r> yeah
<oliv3r> or rather, the fix is, to set ldo3 to something not 0 (and thus have it be on in u-boot) and thus the kernel can't turn it off
<oliv3r> but I think there's a bug in the AXP, that if you toggle the ldo3/4 a few times, the PMIC shuts off
<oliv3r> i'm going to enable interrupts next to see if the pmic updates its status or emits an interrupt before doing so
<oliv3r> but It seems like this is a hardware bug, where we can turn the ldo off, but not reliably on again
<oliv3r> unless there's some undocumented requirement in turning other registers on/off too
<oliv3r> anybody in talks with X-Powers/allwinner atm :)
fkluknav has quit [Ping timeout: 240 seconds]
<oliv3r> i just made a u-boot script, and toggeling ldo4 on off for 5 minutes was no problem
<oliv3r> toggeling ldo3, after 2 - 4 times it always causes the PMIC to die
r1mikey has quit [Remote host closed the connection]
<oliv3r> and this from u-boot, so hardly any dependancy should be there
<KotCzarny> whole pmic?
<oliv3r> yeah
r1mikey has joined #linux-sunxi
<oliv3r> the whole PMIC goes into 'shutdown' mode it seems
<KotCzarny> some fuse blowing maybe?
<oliv3r> all power lines except LDO1 drop to 0
<oliv3r> from turning on an unconnected LDO3?
<oliv3r> doubtfull :)
<KotCzarny> some voltage spikes making it failsafe shutdown
<oliv3r> well you can try it if you have an axp209
<KotCzarny> (disclaimer: i'm not electrician)
<oliv3r> we've 3 EE's also thinking on this issue :)
<KotCzarny> my bpi-r1 is doing important job of providing me with the internet ;)
<oliv3r> :p
<KotCzarny> i would bet on some failsafe trigger, or spikes on the shutdown line
<KotCzarny> connect oscis on everything you can and observe what happens
<oliv3r> i've been using 2 scopes to check everything out :)
<oliv3r> 6 channels of monitoring
<oliv3r> and even then i checked all inputs and outputs
<oliv3r> they are, perfect
<oliv3r> no spikes, no ripples, perfect power
<oliv3r> and we're seeing this on 100's of boards
<oliv3r> :)
<KotCzarny> that's bad
<KotCzarny> workaround, dont use ldo3 ;)
<oliv3r> lol
<oliv3r> it seems to affect all AXP209 users
vishnup has quit [Remote host closed the connection]
<oliv3r> well you can use it fine, just never disable it
<KotCzarny> hmm
<KotCzarny> otoh it could be used as a workaround for full poweroff ;)
<oliv3r> you can turn it off when you power down of course
<oliv3r> just once on, once off
<oliv3r> that's the rule
<KotCzarny> s/for/for lack of/
<KotCzarny> no, i mean there is no 'shutdown' on sunxi chips implemented
<KotCzarny> your trick sounds like a solution ;)
<oliv3r> erm, i think there is
<oliv3r> there's axp power_off
<oliv3r> which turns off the axp (which turns all power)
<oliv3r> in 4.10 anyway
<oliv3r> and u-boot has do_poweroff in axp209.c
<oliv3r> so both support power off
<KotCzarny> nice, now to find the way to implement power-on-on-gpio in uboot and we are done
<oliv3r> you can't? you need the AXP to turn power back on
<oliv3r> which can be done, as the axp has power on gpio and the PEK (power on) keys
<oliv3r> and the reset buttons
<oliv3r> afaik this (can/is) solved al ready is it not?
vishnup has joined #linux-sunxi
fkluknav has joined #linux-sunxi
<KotCzarny> i havent seen 'power off' part in mainline uboot/kernel yet
<KotCzarny> i've seen 'pretend to be powered off' in bsp uboot
<oliv3r> power off for sure works on 4.10
<oliv3r> this should turn it off
<oliv3r> this turns the PMIC fully off
<KotCzarny> haven't tried 4.10 yet
vickycq has quit [Ping timeout: 255 seconds]
<oliv3r> it's in 4.8 already
<oliv3r> 4.6 to
<KotCzarny> must've missed it
<oliv3r> i already see it in .4
<oliv3r> 4.4
<KotCzarny> o.o
<wens> KotCzarny: power off works fine
<wens> KotCzarny: it was introduced very early
<KotCzarny> maybe i have never tried it on a20 then and my memory is all confused
<oliv3r> wens: it is really only ldo3 toggeling that causes the PMIC to shutdown; ldo4 is fine
<shadeslayer> bbrezillon: hi, I was wondering if you could point me to the video of the talk associated with these slides https://events.linuxfoundation.org/sites/events/files/slides/brezillon-drm-kms.pdf
Net147 has quit [Ping timeout: 268 seconds]
<bbrezillon> shadeslayer: not sure it exists, I know there was one edition of ELCE where recordings were lost by the LF, don't know if it's the one
<bbrezillon> but you'll find plenty of good talks on this topic
Net147 has joined #linux-sunxi
<shadeslayer> bbrezillon: oh? got any recommendations? I'm trying to learn more about the drm bits :)
<bbrezillon> shadeslayer: I like Laurent's talks
<shadeslayer> thanks :)
vickycq has joined #linux-sunxi
terra854 has joined #linux-sunxi
IgorPec has quit [Ping timeout: 260 seconds]
ericxdu_ has quit [Ping timeout: 240 seconds]
ericxdu has joined #linux-sunxi
reydecopas has joined #linux-sunxi
<MoeIcenowy> finally got PB display to work by several "i2c" command ;-)
<MoeIcenowy> seems that ANX shouldn't be started before TCON do output
<reydecopas> hi, anyone here was able to make sun8i-ce work properly in orange pi plus?
lurchi__ is now known as lurchi_
<montjoie> sun8i-ce is experimental
<montjoie> reydecopas: I need to finish it
<reydecopas> @montjoie Can I help you in something?
<KotCzarny> make it work reliably with most popular algos? ;)
<montjoie> for the moment no, I need to finish it
<montjoie> the biggest problem is to handle non aligned request
cptG_ has joined #linux-sunxi
<montjoie> I have begin to work on fallback for handling them
<reydecopas> ok, I am eager to try it...
<montjoie> and let CE only work on easy request
apritzel has joined #linux-sunxi
<reydecopas> if you like I can make you a "howto" for you to publish in your web
<montjoie> reydecopas: my last bench will disappoint you
<apritzel> MoeIcenowy: wow, that was fast ...
<BenG83> MoeIcenowy, nice
<apritzel> MoeIcenowy: so did you just replay some magic I2C commands from some BSP code?
<MoeIcenowy> apritzel: yes
<apritzel> MoeIcenowy: and once the bridge is set up, it just works and don't need to take care of it anymore?
<KotCzarny> magic, magic everywhere
cptG has quit [Ping timeout: 240 seconds]
<MoeIcenowy> ys
<MoeIcenowy> yes
<apritzel> nice
<montjoie> reydecopas: howto for what ?
Net147 has quit [Ping timeout: 260 seconds]
r1mikey has quit [Remote host closed the connection]
<MoeIcenowy> but if I do the operations via soft i2c bus in U-Boot source code it fails...
<MoeIcenowy> mysterious
<MoeIcenowy> (if I do them in u-boot cmdline, it's ok
<BenG83> I tink as long as we dont turn it off during sleep, configuring it once works
<apritzel> BenG83: yeah, was thinking about this as well
<BenG83> I am currently collecting the current consumptions of all the components
<MoeIcenowy> P.S. the internal keyboard seems to fail to work under U-Boot
<BenG83> oh?
<BenG83> worked for me at least with the BSP u-boot
<BenG83> ah no wait, that was via uart0...
<reydecopas> montjoie: to the average user... I mean a howto for building maybe armbian, enable config in kernel, getting compile cryptodev, and openssl with cryptodev support and openvpn
<BenG83> does u-boot have USB HID drivers?
<MoeIcenowy> BenG83: yes.
<apritzel> but I think it's picky
<apritzel> I had this issue before where it wouldn't accept one of my keyboards
<BenG83> I have sometimes troubles with the keyboard after suspend
<montjoie> reydecopas: why not
<KotCzarny> reydecopas: average user will probably never use it consciously
<KotCzarny> ie. once algo/engine is registered in kernel with highest priority, its used
<MoeIcenowy> I will try to redo anx source to reproduce the procedure of ANX6345 initialization code in BSP
<reydecopas> KotCzarny: that would be amazing
Net147 has joined #linux-sunxi
<KotCzarny> for howtos you can try googling: via padlock openssl
<KotCzarny> or similar
r1mikey has joined #linux-sunxi
r1mikey has quit [Remote host closed the connection]
ericxdu has quit [Ping timeout: 240 seconds]
ericxdu has joined #linux-sunxi
<apritzel> BenG83: thanks for filling the PB wiki page
<BenG83> some should write something about sunxi support
cnxsoft has quit [Quit: cnxsoft]
<BenG83> *one
popolon has joined #linux-sunxi
reydecopas has quit [Quit: Page closed]
lurchi_ is now known as lurchi__
Putti has quit [Ping timeout: 240 seconds]
Putti has joined #linux-sunxi
lurchi__ has quit [Ping timeout: 260 seconds]
muvlon has quit [Ping timeout: 240 seconds]
<walkiry> montjoie: i also noticed that the key (exposant) buffer is not reversed [MSB...LSB] (in contrary to other data such as modulus and encryption buffer )
msevwork has quit [Quit: Leaving]
<montjoie> thanks
<MoeIcenowy> oh the key to make eDP panel work is to set lane num to 1, not 2
r1mikey has joined #linux-sunxi
reinforce has quit [Quit: Leaving.]
reinforce has joined #linux-sunxi
<apritzel> btw: USB and MMC support for A64 (plus the associated Pine64 and BananaPi M64 DT bits) have made it into Linus' tree now
r1mikey has quit [Remote host closed the connection]
scream has joined #linux-sunxi
<MoeIcenowy> good news ;-)
<MoeIcenowy> maybe it's now time to make a Pinebook dts ;-)
<BenG83> yay, I hate the BSP extracted dts
<BenG83> there are some special GPIOs
<BenG83> not sure how those will be handled for mainline
sgteem_ has quit [Ping timeout: 255 seconds]
terra854 has quit [Ping timeout: 240 seconds]
terra854 has joined #linux-sunxi
<apritzel> BenG83: special in what way? Port_L? or AXP GPIOs?
<BenG83> as in they turn things like the audio PA on, disable the backlight power supply
<BenG83> not sure how those are usually defined
<apritzel> from the top of my head for the backlight you would define a switched regulator, toggled by that GPIO
<MoeIcenowy> P.S. for audio PA on a custom property is also used by sun4i-codec in mainline
<BenG83> ok
<apritzel> similar to what we use for some PHYs
<BenG83> I just added the pins to the wiki
<apritzel> (Ethernet PHYs)
wzyy2 has quit [Ping timeout: 260 seconds]
<apritzel> MoeIcenowy: BenG83: right, in Documentation/devicetree/bindings/sound/sun4i-codec.txt: - allwinner,pa-gpios: gpio to enable external amplifier
<MoeIcenowy> https://github.com/Icenowy/u-boot/tree/a64-pb-lcd here's a branch of U-Boot that supports LCD
<MoeIcenowy> I mean Pinebook LCD ;-)
<jelle> nice!
r1mikey_ has joined #linux-sunxi
jernej has joined #linux-sunxi
r1mikey_ has quit [Remote host closed the connection]
r1mikey has joined #linux-sunxi
wzyy2 has joined #linux-sunxi
<jernej> MoeIcenowy: That's great. In theory it should also work on teres from olimex?
<MoeIcenowy> yes but the ATF hack should change
<MoeIcenowy> as different LDOs are used
<jernej> MoeIcenowy: But a bit awkward, if one wants to use hdmi also :)
<MoeIcenowy> wait for the kernel support ;-)
<jernej> or you mean, I should write one :)
<BenG83> Teres uses different GPIOs for LCD control iirc
johny_ has quit [Ping timeout: 260 seconds]
<jernej> that is also slight change
<MoeIcenowy> but for people who want both LCD and HDMI, they should wait for my DE2 patchset and wens' multiple pipeline patchset to be merged ;-)
<jernej> *only
<BenG83> there are slight differences from the tablet reference design all those boards come from
<MoeIcenowy> BenG83: yes I2C bus used is different
<jernej> MoeIcenowy: I know, but at least armbian use out of tree simplefb support for some time now, which is nice "early adopters" approach
<jernej> :wq
<jernej> sorry, wrong window :)
<apritzel> MoeIcenowy: it's DLDO2 and FLDO1 for the bridge?
<MoeIcenowy> for TERES it's DLDO2/3
<MoeIcenowy> apritzel: for Pinebook it is.
<BenG83> does anyone have Azpen Hybrx hardware?
<BenG83> or do schematics for that even exist in public>
<BenG83> ?
gzamboni has joined #linux-sunxi
dave0x6d has joined #linux-sunxi
f0xx has quit [Ping timeout: 240 seconds]
sgteem has joined #linux-sunxi
r1mikey has quit [Remote host closed the connection]
r1mikey has joined #linux-sunxi
komunista has quit [Quit: Leaving.]
matthias_bgg has quit [Quit: Leaving]
lurchi__ has joined #linux-sunxi
r1mikey has quit [Remote host closed the connection]
<apritzel> is there any datasheet for the Foresee NCEMASD9-08G eMMC chip on the PB?
<apritzel> will the same chip be in the final version?
r1mikey has joined #linux-sunxi
<apritzel> (just curious about the performance, esp. for writing)
tkaiser has joined #linux-sunxi
<apritzel> tkaiser: sounds a bit too promising, actually, I'd suspect the write performance to be much worse
<apritzel> tkaiser: but anyway thanks for the link
matthias_bgg has joined #linux-sunxi
<tkaiser> apritzel: Well, eMMC on OPi Plus 2E for example is almost as fast (a few MB/s less but otherwise comparable)
<apritzel> mmh, interesting, the cheap Samsung eMMCs specify only 6 MB/s for writing
<apritzel> I'd expect this to be similar in that same price range
<MoeIcenowy> Foresee is one of the eMMC vendors in China.
r1mikey has quit [Remote host closed the connection]
<MoeIcenowy> I think the final version's eMMC may be not this model, but it's Foresee.
<MoeIcenowy> I have seen the final version's sample board (still some bugs to fix)
Gerwin_J has quit [Quit: Gerwin_J]
r1mikey has joined #linux-sunxi
<apritzel> yeah, just guessing from the usual scheme: the smaller capacities use less banks and less buffer to cache writes, so suffer performance-wise
<BenG83> I havent heard from Tl since he left for China, but if they do another PCB cycle maybe I can sneak in some more testpads :)
<BenG83> so we can internal hardware mods
<BenG83> *have
Gerwin_J has joined #linux-sunxi
Mr__Anderson has joined #linux-sunxi
r1mikey has quit [Remote host closed the connection]
lurchi_ has joined #linux-sunxi
lurchi__ has quit [Ping timeout: 240 seconds]
r1mikey has joined #linux-sunxi
fkluknav has quit [Ping timeout: 255 seconds]
lurchi__ has joined #linux-sunxi
lurchi_ has quit [Ping timeout: 240 seconds]
doppo has quit [Ping timeout: 255 seconds]
libv_ has joined #linux-sunxi
robogoat has quit [Ping timeout: 240 seconds]
libv has quit [Ping timeout: 256 seconds]
libv_ has quit [Ping timeout: 260 seconds]
fkluknav has joined #linux-sunxi
Leepty has quit [Quit: Leaving]
lurchi__ has quit [Ping timeout: 240 seconds]
Andy-D has joined #linux-sunxi
libv has joined #linux-sunxi
vishnup has quit [Ping timeout: 260 seconds]
robogoat has joined #linux-sunxi
lurchi__ has joined #linux-sunxi
r1mikey has quit [Remote host closed the connection]
Andy-D has quit [Ping timeout: 240 seconds]
leviathancn has quit [Remote host closed the connection]
Gerwin_J_ has joined #linux-sunxi
Gerwin_J has quit [Ping timeout: 260 seconds]
Gerwin_J_ is now known as Gerwin_J
fkluknav has quit [Ping timeout: 240 seconds]
Gerwin_J has quit [Ping timeout: 260 seconds]
BenG83 has quit [Quit: Leaving]
netlynx has joined #linux-sunxi
netlynx has joined #linux-sunxi
netlynx has quit [Changing host]
phipli has joined #linux-sunxi
r1mikey has joined #linux-sunxi
f0xx has joined #linux-sunxi
HeavyMetal has quit [Ping timeout: 240 seconds]
r1mikey has quit [Remote host closed the connection]
r1mikey has joined #linux-sunxi
lurchi__ has quit [Ping timeout: 240 seconds]
<MoeIcenowy> keyboards works well under U-Boot
<MoeIcenowy> (Pinebook
<MoeIcenowy> I just forgot to enable its VBUS
<apritzel> MoeIcenowy: GPIO?
<MoeIcenowy> GPIO0LDO in AXP
<MoeIcenowy> it's used for the controlling pin of the 5v output ic
<MoeIcenowy> and seems that USB
<apritzel> what does that pin control exactly? The hub?
<apritzel> or just that HID daughter board?
<MoeIcenowy> all USB devices' VBUS and the I2C touchpad's vcc
<MoeIcenowy> s/vcc/VCC/
<KotCzarny> controlling vbus is handy sometimes
<apritzel> So I think I am going for SCPI power-domains to control all those peripherals
<KotCzarny> pity its not per-port
<MoeIcenowy> without it toggled the two USB ports also got unusable
r1mikey has quit [Remote host closed the connection]
<apritzel> MoeIcenowy: oh, OK, so for all USB
* MoeIcenowy extracting a system to SD card
r1mikey has joined #linux-sunxi
tkaiser has quit [Ping timeout: 260 seconds]
<MoeIcenowy> Now with small modifications I successfully booted into kernel, with simplefb and console on LCD
<MoeIcenowy> now the only problem is that my SD card lacks a /sbin/init ;-)
<apritzel> MoeIcenowy: pff, userland, who cares?
<MoeIcenowy> ;-)
<apritzel> MoeIcenowy: you can leave that as an exercise to the reader
<MoeIcenowy> but I should prepare it now for testing...
<MoeIcenowy> if you see Icenowy_PB after some time it will means I had a great success ;-)
tkaiser has joined #linux-sunxi
* apritzel starts holding his breath
<tkaiser> MoeIcenowy: off-topic: Is Pinebook display TN or IPS?
<MoeIcenowy> tkaiser: I don't know...
<ssvb> MoeIcenowy: it's very easy to check - TN has much worse viewing angles - https://linux-sunxi.org/MSI_Primo81#Pictures
|Jeroen| has joined #linux-sunxi
<apritzel> tkaiser: it's LCD ;-)
<MoeIcenowy> the color didn't change a lot with ~ 150 degree
<tkaiser> MoeIcenowy: ssvb: Just realized that it's already on the wiki.
<apritzel> tkaiser: indeed, and the Amazon hit doesn't say, so it's TN :-D
Gerwin_J has joined #linux-sunxi
<ssvb> MoeIcenowy: one side is much worse than the others, for desktop TN monitors it is usually the bottom side (looking from below the table level upwards)
<MoeIcenowy> oh I do not like this Pinebook keyboard
popolon has quit [Quit: WeeChat 1.4]
<MoeIcenowy> Installing finch via apt
yann has quit [Ping timeout: 240 seconds]
tkaiser has quit [Ping timeout: 260 seconds]
matthias_bgg has quit [Quit: Leaving]
<MoeIcenowy> oh forgot to build my usb wifi dongle's driver
<MoeIcenowy> P.S. as I didn't use RTL8723CS and used a ath9k_htc instead now this laptop is a binary blob-less one ;-)
r1mikey has quit [Remote host closed the connection]
<MoeIcenowy> apritzel: the open-source DRAM initialization code of A64 seems to steal my 1GiB DRAM -- it should have 2GiB according to ayufan
<KotCzarny> no mali?
r1mikey has joined #linux-sunxi
<MoeIcenowy> I mean the DRAM initialization code...
<apritzel> MoeIcenowy: interesting, it works on other boards with 2GB
<MoeIcenowy> or maybe my board have really only 1GiB ;-)
<apritzel> MoeIcenowy: how many chips do you have?
<apritzel> the photo from BenG83 suggests it has 4 chips
<MoeIcenowy> let me disassemble it after several hours...
<apritzel> MoeIcenowy: thanks
<MoeIcenowy> oh the touchpad seems to be also belong to the HID...
<MoeIcenowy> maybe the I2C interface is only for the EC ;-)
yann-kaelig has joined #linux-sunxi
dave0x6d has quit [Quit: Connection closed for inactivity]
<apritzel> MoeIcenowy: I believe this is what TL said: it also uses USB
<MoeIcenowy> yes it's right ;-)
IgorPec has joined #linux-sunxi
<apritzel> which should make keyboard and touchpad support a no-brainer software-wise: just works!
<MoeIcenowy> but unfortunately the touchpad to mouse translation occurs in EC
<apritzel> MoeIcenowy: really?
<MoeIcenowy> so we cannot furthurly support touchpad gestures, etc
<apritzel> it's shows as a mouse?
<apritzel> time to write a new HID firmware, then ...
<MoeIcenowy> yes, evtest only returns REL_X, REL_Y, REL_HWHEEL, REL_WHEEL
<MoeIcenowy> but not MT_xxx
<apritzel> so does two-finger scrolling work, at least?
<apritzel> by simulating the wheel?
<MoeIcenowy> two-finger scrolling work.
<MoeIcenowy> both vertically and horizontically
<MoeIcenowy> however you cannot change it to "nature scroll"
<apritzel> can someone post a picture of the HID board?
<apritzel> I wonder if we can update the firmware in it
<MoeIcenowy> it's said that the EC is on the main board...
<MoeIcenowy> and I connot recognize its model number
<MoeIcenowy> P.S. now I made hall sensor work as gpio_keys EV_SW SW_LID
<MoeIcenowy> I wonder what's the difference between 8723bs and 8723cs...
<apritzel> one letter
wzyy2 has quit [Read error: Connection reset by peer]
<apritzel> ;-)
r1mikey has quit [Ping timeout: 260 seconds]
Gerwin_J has quit [Quit: Gerwin_J]
<KotCzarny> someone recently mantioned what's different
<KotCzarny> something unimportant
apritzel has quit [Ping timeout: 260 seconds]
fkluknav has joined #linux-sunxi
wzyy2 has joined #linux-sunxi
leviathan has joined #linux-sunxi
<jernej> I think it was something about RF part
Mr__Anderson has quit [Quit: Leaving.]
massi has quit [Remote host closed the connection]
tkaiser has joined #linux-sunxi
enrico_ has quit [Quit: Bye]
<KotCzarny> random google: CHIP Pro uses the Realtek 8723DS, which is functionally the same as the 8723BS, but built with a lower process node die. No 5Ghz, but still all-you-can-eat 2.4Ghz
Gerwin_J has joined #linux-sunxi
yann has joined #linux-sunxi
tsuggs has joined #linux-sunxi
jernej has quit [Quit: Konversation terminated!]
HeavyMetal has joined #linux-sunxi
HeavyMetal has joined #linux-sunxi
HeavyMetal has quit [Changing host]
fkluknav has quit [Ping timeout: 268 seconds]
BenG83_PB has joined #linux-sunxi
<BenG83_PB> the keyoard/touchpad bridge on the PB is just a 8051
<BenG83_PB> not sure if it has flash
<BenG83_PB> apparently 16K flash with USB bootloader
netlynx has quit [Quit: Ex-Chat]
<BenG83_PB> I think the last time I programmed something for 8051 must be 20 years ago...
Nyuutwo has joined #linux-sunxi
fkluknav has joined #linux-sunxi
JohnDoe_71Rus has quit [Quit: KVIrc 4.9.2 Aria http://www.kvirc.net/]
terra854 has quit [Quit: Connection closed for inactivity]
mhlavink has quit [Ping timeout: 260 seconds]
mhlavink has joined #linux-sunxi
tkaiser has quit [Ping timeout: 255 seconds]
xes has quit [Ping timeout: 240 seconds]
tkaiser has joined #linux-sunxi
Gerwin_J has quit [Quit: Gerwin_J]
mhlavink_afk has joined #linux-sunxi
mhlavink has quit [Ping timeout: 260 seconds]
xes has joined #linux-sunxi
florianH has quit [Quit: Connection closed for inactivity]
phipli has quit [Ping timeout: 255 seconds]
wzyy2 has quit [Remote host closed the connection]
netlynx has joined #linux-sunxi
netlynx has joined #linux-sunxi
netlynx has quit [Changing host]
IgorPec has quit [Ping timeout: 255 seconds]
lamer14879695846 has joined #linux-sunxi
doppo has joined #linux-sunxi
tkaiser has quit [Ping timeout: 260 seconds]
lamer14879695846 has quit [Quit: jIRCii - http://www.oldschoolirc.com]
reinforce has quit [Quit: Leaving.]
leviathan has quit [Ping timeout: 255 seconds]
yann-kaelig has quit [Quit: Leaving]
chomwitt has joined #linux-sunxi
Ntemis has quit [Ping timeout: 240 seconds]
lovepupils has joined #linux-sunxi
Mr__Anderson has joined #linux-sunxi
f0xx has quit [Ping timeout: 255 seconds]
jstein_ has joined #linux-sunxi
jstein_ is now known as jstein
Net147 has quit [Ping timeout: 240 seconds]
|Jeroen| has quit [Quit: dada]
Net147 has joined #linux-sunxi
<lovepupils> hello I see that since december we now have a proper armbian image for the orange pi pc2. is it ok for daily use as headless server?
Spectator has joined #linux-sunxi
Spectator has quit [Client Quit]
lurchi__ has joined #linux-sunxi
Ntemis has joined #linux-sunxi
Wizzup has quit [Ping timeout: 260 seconds]
hramrach has quit [Ping timeout: 245 seconds]
Wizzup has joined #linux-sunxi
jstein has quit [Remote host closed the connection]
lemonzest has quit [Quit: Leaving]
lovepupils has left #linux-sunxi ["Leaving"]
Wizzup has quit [Read error: Connection reset by peer]
Wizzup has joined #linux-sunxi
Wizzup has quit [Client Quit]
Wizzup has joined #linux-sunxi
<willmore> I think I'm going to keep this "<apritzel> MoeIcenowy: pff, userland, who cares?"
<willmore> MoeIcenowy, doesn't the ath9k_htc take a firmware blob?
<willmore> BenG83_PB, 8051 use should be a crime.
LargePrime has quit [Ping timeout: 268 seconds]
phipli has joined #linux-sunxi
LargePrime has joined #linux-sunxi
fkluknav has quit [Remote host closed the connection]
lurchi__ is now known as lurchi_
leio has quit [Ping timeout: 240 seconds]
leio has joined #linux-sunxi
deskwizard has quit [Remote host closed the connection]
deskwizard has joined #linux-sunxi
dave0x6d has joined #linux-sunxi
paulk-collins has quit [Quit: Leaving]
<lurchi_> willmore: Cypress FX2 has a 8051 core ...
netlynx has quit [Quit: Ex-Chat]
leio has quit [Ping timeout: 260 seconds]
Ntemis has quit [Remote host closed the connection]