<qwebirc62733>
I have loaded debian onto an sd card and press m when I boot the nanonote and the boot hangs when we get to loading uImage the nanonote can boot jlime off of a 2 gig sd card i have and openwrt from a 4 gig card is it likely that the problem is with the bootloader?
<qwebirc62733>
I don't really want to flash the bootloader again because theres lots of stuff installed on the nand that I don't want to mess up
<qi-bot>
[commit] Werner Almesberger: Fix our trigonometry: the z0 inclination is expressed as a tangent, not a sine. http://qi-hw.com/p/ben-scans/98b6050
<rafa>
why somebody invented the "workaround" thing?
<rafa>
now I can not live without it :P
<zear>
hey rafa, what is the most up to date jlime toolchain?
<rafa>
zear: hey.. sorry.. I forgot that.. the latest uploaded is the one you already know.. I have another more complete (with a lot more libs).. if you want that I will upload right now
<zear>
if that's not a problem, that would be very welcome :)
<rafa>
zear: okey.. let me do that ;)
<rafa>
zear: uploading
<rafa>
wpwrak: lisandropm is from bahia blanca and he knows the Universidad del Sur. He could know if the Universidad nacional del sur has the lab you need
<lisandropm>
wpwrak: we have at least an specturm analyzer in that frequency band and a anechoic chamber
<rafa>
wpwrak: no sure if Bahia Blanca is okey for you
<rafa>
lisandropm: estara' durmiendo? :)
<wpwrak>
hola lisandropm !
<rafa>
ha!
<rafa>
no :D
<lisandropm>
what I have to check is if the analyzer fullfils th requirements and if the chamber is finished (it is built, but I think they were missing some details)
<wpwrak>
rafa: naw, just got up about a minute ago ;-)
<lisandropm>
and, of course, check for permission (I don't think that would be hard)
<wpwrak>
lisandropm: do you also have a signal generator ?
<rafa>
wpwrak: just on time
<lisandropm>
I *think* we have one in that frequency range, but I have to double check
<wpwrak>
kewl. what sort of things are you using the lab for ?
<lisandropm>
wpwrak: if coming to Bahia Blanca is not too much travel for you, I can ask this week for permission (and, of course, check that we have what you need)
<rafa>
lisandropm: do you know if UBA could have something similar? I asked at lugfi, as you know.. but no answers
<lisandropm>
wpwrak: the lab has gotten new equipmnet in the last few years, and I am not working in it at this time (I am trying to learn to write a device driver now ;) )
<lisandropm>
rafa: no, I don't have a clue of UBA
<lisandropm>
I live 700 km away ;)
<wpwrak>
lisandropm: bahia blanca is a bit far, particularly since speed controls on the highways probably have gotten better in recent years. but if i can't find anything closer, it would be a good plan B.
<rafa>
lisandropm: I live in BA, I should know better :P
<lisandropm>
wpwrak: no highways between Buenos Aires and BahÃa :-(
<lisandropm>
I'll let you know as soon as I have a reply.
<lisandropm>
do you prefer by IRC or mail?
<wpwrak>
lisandropm: and if the equipment is up to it, it would also be nice to look for unwanted emissions at harmonics of 2.4 GHz (for FCC compliance and such)
<wpwrak>
thanks ! either works fine :)
<lisandropm>
ok :)
<wpwrak>
(highway) well, there's a decent one at least until Mar del Plata. after that, speed limits are probably enforced by road conditions ...
<wpwrak>
lemme see if i get something else if i download it via the web
<kristianpaul>
please
<wpwrak>
nope. the same thing
<qi-bot>
[commit] kristianpaul: Updated instruccions about how to get the gerber in Heekscad also niw Case is now full green http://qi-hw.com/p/ben-wpan/058c417
<kristianpaul>
my mistake then
<kristianpaul>
hope now is okay
<wpwrak>
now i see it ! :)
<kristianpaul>
btw your ben scans are grat if i have time i'll print one later
<kristianpaul>
i must leave now i need go to do soeme errands
<wpwrak>
hmm, still a bit on the fat side. also, the board (currently) needs about 0.5 mm of free space at the bottom.
<kristianpaul>
ok
<kristianpaul>
i'll fix
<kristianpaul>
may be i can off shape it
<kristianpaul>
hmm
<kristianpaul>
or not
<kristianpaul>
heh
<kristianpaul>
bbl
<wpwrak>
aha, juan64bits found the bug in my rename tracking code :) if you change a sheet's title, schhist will think it's a different sheet
<wpwrak>
and i can also predict where the next rename will be :)
<kristianpaul>
damm SDL is broken again in openwrt backfire xbusrt :/
<rafa>
kristianpaul: We wrote a little script which check dependences and download the needed packages. Then we use opkg to install them. To avoid the out of memory when opkg installs the already downloaded packages we avoid that it reads the huge list of packages, so he avoids that step. Finally it installs those packages without swap. (opkg would like to check the dependences, but we already checked that before to download).
<kristianpaul>
rafa: ja ! you're going to rewrite/replace opkg at the end :)
<rafa>
kristianpaul: it is still slow.. because our script need to read the huge list of packages yet.. but well, at least it works without swap needed
<kristianpaul>
good :)
<rafa>
kristianpaul: well, no idea what to do.. I do not know why it sucks with memory
<kristianpaul>
hmm
<kristianpaul>
rafa: you can report that as a bug no?
<rafa>
kristianpaul: yes, surely. But I need to understand where is the problem to give a good report. If I do not find that info I will report anyway.. Maybe they know what they need to debug
<kristianpaul>
mth: it works thanks !
<kristianpaul>
now where it should go in the openwrt code?
<kristianpaul>
ohh no apps..
<kristianpaul>
seems missing config somewhere..
<kristianpaul>
lets see
<kristianpaul>
wpwrak: did you solve your clock issue?
<kristianpaul>
i feel i close to fall on same problem
<kristianpaul>
or my timing will be crazy tring to understan some data fromt the gpio :/
<wpwrak>
kristianpaul: you mean gmenu2x vs. clocks ? i just got rid of gmenu2x :) but it seems that this issue is fixed in the latest version