03:55 <saintdev> are there any known issues with ethernet on s805/odroid-c1? I'm seeing some extremely high round trip times, causing dropped packets.

04:08 <saintdev> Host dagger is the Odroid-C1, claymore is another wired host on the same network. https://www.irccloud.com/pastebin/NhaF3Q8c/

04:10 <saintdev> This is on 5.4.5

06:52 <xdarklight> saintdev: unfortunately there is a known issue. temporary fix: https://patchwork.kernel.org/patch/11309895/

06:52 <xdarklight> proper solution (work-in-progress): https://patchwork.kernel.org/cover/11310719/

06:54 <xdarklight> also this commit is needed, which will make it into 5.4.8: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/commit/?h=linux-5.4.y&id=1dccca4de7acaa50697f378b9097de68baf606ec

11:32 <Darkmatter66> chewitt, I only tested u-boot by chainloading it from the vendor u-boot, I didn't test the fip package documentation and they probably contain a lot of errors

11:33 <Darkmatter66> chewitt I didn't want to burn the mainline u-boot to the internal flash in case anything goes wrong and i get a bricked device

11:33 <Darkmatter66> chewitt i will be trying the hdmi dongle trick when i get my hands on one

18:11 <[TheBug]> I know this may be a bit off topic, but would be interested to know if anyone who has the Khadas VIM1 has ever run into an issue where both the USB 2.0 ports (non usb c port) basically no longer work

18:11 <[TheBug]> I am not sure if the hub in use there is dead

18:11 <[TheBug]> or what

18:11 <[TheBug]> but only usb access I have is by using a usb-c to usb A adapter and placing a hub on it

18:11 <[TheBug]> I checked the fuses on both the USB 2.0 ports

18:11 <[TheBug]> and both are still good

18:12 <[TheBug]> both th 900mA and 500mA fuses are still good

18:46 <B1oHazard> hi, i use wayland+gbm blobs with gnome wayland, can i get big opengl via gl4es? or it work only with X

20:56 <saintdev> xdarklight: thanks!

21:42 <saintdev> xdarklight: fwiw, the packet loss was low enough, it wasn't an issue for me. Until I just setup a WireGuard link and it caused it to jump to 50-90% over the VPN link, lol