<kristianpaul> never watches a battelstar galactica i should some day
<kristianpaul> live is week :-)
<kristianpaul> s/live/life
<Fallenou> I go to sleep late during the week
<Fallenou> on Friday i am tired
<kristianpaul> At what time you wake up and go sleep during week?
<Fallenou> humm waking up at like 8h30
<Fallenou> and go to sleep at 1 or 1h"0
<Fallenou> 30*
<kristianpaul> 7hrs sleep is good :-)
<Fallenou> well not enough for me :)
<Fallenou> humm rtems manual seems outdated about rtems configuration struct
<Fallenou> even on 4.10.0 branch
<kristianpaul> he, yeah i have same on pdf..
<Fallenou> rtems doc is really not up to date usually
<Fallenou> that's really too bad !
<kristianpaul> yeah, considering you'were in gsoc ;-)
<kristianpaul> I wonder if you had to dig code to get answers from time to time?
<Fallenou> ooooh yes
<Fallenou> more than you would think :')
<Fallenou> there is nothing more up to date than the code ;)
<kristianpaul> agree
<kristianpaul> But well, doc is important..
<kristianpaul> waits ack-grep
<Fallenou> sure it is
<Fallenou> definitely
<kristianpaul> 170Kbytes/sec
<kristianpaul> uploading a 18Mb tarball to /flash
<kristianpaul> and crashed...
<kristianpaul> after 8 fifo overflow messages
<Fallenou> oh :(
<Fallenou> so you reduced the speed kristianpaul ?
<kristianpaul> not yet
<kristianpaul> but good news i send all patches and no crash or overflow !
<kristianpaul> try now at 10M ful duplex
<Fallenou> crosses fingers
<kristianpaul> argg i set eth0 to 10 and it again get back to 100...
<kristianpaul> I did ethtool -s eth0 speed 10 duplex half
<kristianpaul> Fallenou: sure i dont need 10M support in rtems side first?
<Fallenou> the negociation is done by the phy i think
<Fallenou> rtems does not know about it
<kristianpaul> ha !
<Fallenou> btw if the linux says "i cannot got faster than 10M"
<Fallenou> the other end HAS to say "well ok"
<kristianpaul> not my case
<kristianpaul> let me check
<kristianpaul> but is fun the eth in mm1 just start blinking every second (both greed and orange leds)
<kristianpaul> So i guess who is refusing this changes ;-)
<Fallenou> i don't know the exact signification of the blinkings
<Fallenou> do you ?
<kristianpaul> hehe i do
<kristianpaul> i'm forcing the ethtool here
<kristianpaul> xD
<kristianpaul> with a bash script
<kristianpaul> but no, mm1 cant talk at 10M... i need read more
<kristianpaul> why--
<Fallenou> humm maybe there is some MII register that is forcing negociation at 100
<Fallenou> don't know
<Fallenou> we would have to ask lek
<Fallenou> lekernel
<kristianpaul> please connect !
<kristianpaul> hmm i dont see that in the doc..
<Fallenou> i know there is some setup done for mii
<kristianpaul> harcoded?..
<kristianpaul> looks for RXD2
<Fallenou> some mdio stuff maybe
<kristianpaul> ah but SDIO is handled by software..
<kristianpaul> i think
<kristianpaul> let check bios
<kristianpaul> is slow this  but i dint break..
<kristianpaul> just two fifo messages
<kristianpaul> 8556788 bytes transfered in 65.4 seconds (130777 bytes/s)
<kristianpaul> not bad Fallenou
<kristianpaul> i'll asume that last fix you did helped ;-)
<Fallenou> kristianpaul: great :)
<Fallenou> awesome
<Fallenou> that would have surprised me if it didn't change anything
<Fallenou> i guess i still need to make the driver more efficient to behave well under load
<Fallenou> so you put it into 10 Mbit kristianpaul ?
<kristianpaul> yes
<Fallenou> how ?
<kristianpaul> now i pulling.... but transmision did no started yet... why?¡.. hmmm
<kristianpaul> how?
<Fallenou> yes
<kristianpaul> ftp 192.168.0.42
<kristianpaul> user: foo foo
<kristianpaul> cd /flash
<kristianpaul> mput file.pdf
<Fallenou> yes but the ethernet speed
<Fallenou> is it 10 Mbit/s ?
<kristianpaul> same
<kristianpaul> no
<Fallenou> oh ok
<kristianpaul> 100Mbits
<Fallenou> hum hum
<kristianpaul> i need to check the biutnaging part for 10Mbits
<Fallenou> maybe try again several times
<kristianpaul> yes sure
<kristianpaul> i need a script :-)
<Fallenou> :)
<Fallenou> copy pasting commands in telnet ?
<kristianpaul> telnet?
<kristianpaul> no i mean, ftpd is on rtems
<kristianpaul> i'm the client
<Fallenou> yes
<kristianpaul> i'm -> laptop
<Fallenou> ftp is cleartext protocol
<kristianpaul> yes
<Fallenou> you can telnet 192.168.0.42 21
<Fallenou> then log in
<Fallenou> oh but you do mput
<Fallenou> sorry
<Fallenou> thought you would get a file
<Fallenou> more tricky to send via telnet :)
<kristianpaul> i can cheat this way. i can capture trafic and tcpreplay it later
<Fallenou> yes maybe
<kristianpaul> but i cant see if sucess.. also i guess i need handshake..
<Fallenou> or juste use filezilla it's quick
<kristianpaul> no no
<kristianpaul> X sucks ! remenber ;-)
<kristianpaul> :p
<Fallenou> lol
<kristianpaul> bash scripr will be enouht
<kristianpaul> hey !, the pushing never started
<kristianpaul> may be too big??
<kristianpaul> s/push/pull
<kristianpaul> i still saying: 110 Opening BINARY mode data conection..
<kristianpaul> hmm
<kristianpaul> i'll try with 5Mb
<Fallenou> :o
<kristianpaul> but wait, i'm erasing flash again, just in case got corrupte when the 18Mb file crash..
<kristianpaul> hmm no...
<kristianpaul> lets try 1mb..
<Fallenou> gotta go to sleep !
<Fallenou> good luck with the tests !
<kristianpaul> tks
<kristianpaul> nooo noo... 1mb and get still Opening...
<kristianpaul> :-(
<kristianpaul> hhehe i'll di ttcp now from mm1 to latop and confirm some discoveries..
<kristianpaul> Fallenou: please asap try ttcp from mm1 to laptop/or equivalent
<kristianpaul> arggg
<kristianpaul> sleepy
<kristianpaul> arg
<kristianpaul> :(
<kristianpaul> Fallenou: http://paste.debian.net/108142/ :'(
<wpwrak> wow, ttcp has gotten fat. sttaistics used to be a one liner ;-)
<lekernel> char* * * * * * :)
<kristianpaul> wpwrak: there is also a verbose option !
<kristianpaul> waiting Fallenou feedback
<wpwrak> lekernel: this needs a C syntax extension: char 6*  ;-)
<kristianpaul> now i need find a workaroun to plug the jtag-serial pod again...
<lekernel> yeah, there are "pointing up" USB cables
<lekernel> I posted a link to the qi hardware wiki
<kristianpaul> hmm, wich article?
<lekernel> "pointing up" right angle cable, like http://ntcdistributing.com/images/UH2-2MBR02-12large.jpg
<kristianpaul> but it still needa hole, or the plan is just remove the top acrylic part?
<lekernel> just remove the top acrylic
<kristianpaul> i'll remove the video in/lad/dc in side for now..
<kristianpaul> thinking about drilling later
<lekernel> yeah, that's a solution too
<kristianpaul> lekernel: btw in wich part of bios you define the 100Mbps for minimac? or better question, where is stored the "Basic Status Register" to set in the PHY?
<lekernel> the phy has default correct values, and I did not need to spend time on changing them
<kristianpaul> hmm
<lekernel> the mdio bit banging functions also have some bugs you might need to track
<kristianpaul> but there is a "facility" to oeverwrite it by software just in case
<kristianpaul> ahh bugs.. :-)
<lekernel> yeah, but it's buggy
<lekernel> though it serves its purpose of testing the PCBs
<kristianpaul> yeah, i saw your comments about metastabillity there ;-)
<lekernel> huh?
<lekernel> it has nothing to do with metastability, just software not doing the bit banging correctly
<kristianpaul> ah ok
<kristianpaul> software you mean the bios? or it should be supported by rtems driver?..
<lekernel> all software using libnet
<lekernel> so bios + demo and not rtems
<kristianpaul> ah..
<lekernel> there isn't any mdio implementation in the rtems driver yet
<lekernel> feel free to contribute one...
<kristianpaul> sure :-)
<lekernel> and fix the one in libnet
<kristianpaul> I need ethernet