05:36 <hexdump0815> xdarklight: chewitt: jbrunet: i just verified that for me enabling the SND_MESON and SND_SOC_MESON options on both v5.9.11 and v5.10-rc6 breaks the 1gbit ext eth on both a g12a and a sm1 box

05:38 <hexdump0815> xdarklight: chewitt: jbrunet: with those options disabled it works ... side note the interface is connected to a 100mbit switch, so is not running in 1gbit mode here if that matters

05:41 <hexdump0815> xdarklight: chewitt: jbrunet: broken above means rx is working (i can see other traffic on the interface with tcpfump) but tx is broken (all tx counters are 0 for ethtool -S eth0)

07:09 <angelsl> xdarklight: finally got around to recompiling - CONFIG_MESON_EE_PM_DOMAINS=y was it, thanks a bunch!

08:21 <jbrunet> hexdump0815: net and sounds works fine for me, g12 and sm1. The sound card sets mplls (0,1,2) on start up to provide the usual sound rates. If you remove the sound modules, the mplls will be left in their reset states. If the mpll2 rate is really bothering you, you can try to shuffle around the rate assigned to the mpll in the sound card (see the dts) . It sucks but which rate each mpll gets does not matter, as

08:21 <jbrunet> long as all the necessary rates are provided

08:23 <jbrunet> If the net driver should not pick mpll2, maybe the input should be manually controlled or mpll2 removed the possible sources

15:21 <tdebrouw> is anyone currently working on the mipi interface for the a311d?

15:22 <tdebrouw> I saw that Neil added MIPI DSI phy nodes

15:23 <tdebrouw> for meson-axg