00:29 <d1b2> <Attie> glad you found it useful!

11:11 <d1b2> <rwhitby> I think this is the final front silk. Any final input is welcome.

11:11 <d1b2> <rwhitby> https://cdn.discordapp.com/attachments/613461005392936961/818078421678555166/Screen_Shot_2021-03-07_at_9.41.12_pm.png

11:16 <electronic_eel> there is a thin arrow in the dfp switch section. you don't have arrows for the other sections. why there?

11:21 <d1b2> <rwhitby> yep, I've removed that.

11:21 <d1b2> <rwhitby> Also going to add J1 - J9 to label the ports and jumper blocks

11:22 <d1b2> <rwhitby> I'm not 100% happy with the "5V VBUS DFP Switch" label wording. Any better ideas? It's a load switch between 5V and DFP, which eventually becomes VBUS if you have the right jumper inserted on J9.

11:23 <electronic_eel> maybe just "DFP Switch"? it is very hard to get the full meaning across with just a few words and no schematics. so i wouldn't even try. just give it a name that is easily cross referenced to the schematics.

11:27 <electronic_eel> think about the use cases for this top silkscreen

11:28 <d1b2> <rwhitby> "5V DFP Switch" ?

11:28 <electronic_eel> yeah why not

11:28 <d1b2> <rwhitby> I think the 5V-ness is important

11:29 <electronic_eel> use case 1) make things the user has to connect to identifiable (jumpers, pin headers,...)

11:30 <electronic_eel> use case 2) a short feature list for someone how looks at the board

11:31 <electronic_eel> use case 3) allow to quickly find measurement points when you are debugging some problem with the addon or it's code

11:31 <electronic_eel> use case 4) allow to identify components in case something is broken and you need to replace them

11:32 <electronic_eel> i think for 3) and 4) it is no problem to expect that the user has the schematics and board files open and the silk just guides to the general area of the board

11:34 <electronic_eel> use case 5) make it look nice

11:34 <d1b2> <rwhitby> Jumpers now labelled for 1).

11:34 <d1b2> <rwhitby> https://cdn.discordapp.com/attachments/613461005392936961/818084267631575060/Screen_Shot_2021-03-07_at_10.04.18_pm.png

11:36 <d1b2> <rwhitby> 2) is the text down the middle column

11:37 <d1b2> <rwhitby> 3) available GND points are labelled, as are D+/D-/SBU1/SBU2/VBUS/5V/DFP.

11:45 <d1b2> <rwhitby> I wonder if I should put a test point for the 1.2V rail?

11:49 <d1b2> <Uwe> Test point are seldom a failure!

12:01 <d1b2> <rwhitby> Added 1.2V test point.

12:01 <d1b2> <rwhitby> https://cdn.discordapp.com/attachments/613461005392936961/818090951394066432/Screen_Shot_2021-03-07_at_10.31.08_pm.png

12:02 <d1b2> <rwhitby> I think everything now either has a test point or a 0.1" pad to probe.

12:05 <d1b2> <rwhitby> Also added a warning at top right.

12:05 <d1b2> <rwhitby> https://cdn.discordapp.com/attachments/613461005392936961/818092084513996820/Screen_Shot_2021-03-07_at_10.35.40_pm.png

12:18 <d1b2> <rwhitby> And pointers to VBUS and OUT signals.

12:18 <d1b2> <rwhitby> https://cdn.discordapp.com/attachments/613461005392936961/818095238366756874/Screen_Shot_2021-03-07_at_10.48.04_pm.png

12:18 <d1b2> <rwhitby> https://cdn.discordapp.com/attachments/613461005392936961/818095282230132736/Screen_Shot_2021-03-07_at_10.48.31_pm.png

12:35 <d1b2> <rwhitby> With the appropriate label on the 5V->DFP switch, and the VBUS and OUT labels on the TARGET and SNOOP port connectors, I now think that J9 is suitably self-explanatory.

12:35 <d1b2> <rwhitby> https://cdn.discordapp.com/attachments/613461005392936961/818099631216394280/Screen_Shot_2021-03-07_at_11.04.57_pm.png

12:57 <d1b2> <rwhitby> v0.8c uploaded https://twitter.com/rwhitby/status/1368546011564572673

14:23 <d1b2> <konsgn[no-Mic]> Maybe add text on the bottom describing jumper settings for common use cases? It's always nice picking up a board after a while and using it without needing to lookup docs/schematics. Seems you have room too.