gch9812138865 has joined #openwrt-devel
gch981213886 has quit [Read error: Connection reset by peer]
gch9812138865 is now known as gch981213886
Namidairo has joined #openwrt-devel
feriman has quit [Read error: Connection reset by peer]
<russell--> yeah
* russell-- lives a mile from crowdsupply hq
<russell--> 2km
<mangix> DPAA2. I'm guessing this is powerpc
<russell--> arm, afaik
<mangix> oh wait isn't NPX the company that bought marvell?
<mangix> or was that broadcom
<russell--> NXP
<dorf> it is, mangix
<rsalvaterra> mangix: I… what…? Where the hell did that one come from? Looks really nice!
feriman has joined #openwrt-devel
<dorf> *NXP
<russell--> kind of spendy, i'd be interested in a more trimmed down version, allegedly it'll be open-hardware, iirc
<dorf> lol @ spendy
<dorf> it makes the Turris Omnia look cheap
<rsalvaterra> RP-SMA connectors galore…! But… $650. :(
<mangix> I learned my lesson with the Turris Omnia
<mangix> no spending on expensive hardware
<rsalvaterra> mangix: I got myself two Omnias at the time. Absolutely no regrets (sold one in the mean time, though).
<russell--> fwiw, i asked for an evaluation model in their pre-launch period
<mangix> problem with mine is that I broke off one LED. I also fitted it with mikrotik minipcie cards. pretty disappointing.
* russell-- is interested in using something like it as an open-source fiber CPE
figgyc has quit [Ping timeout: 260 seconds]
<mangix> having said that, mvebu is a pretty solid platform
<dorf> the only "issue" with that box is the binary blob for the ethernet. that's a shame.
<rsalvaterra> mangix: The broken LED isn't exactly a problem with the Omnia itself… :P
<mangix> right but the wifi is the biggest issue
<mangix> that's what I get for messing with it :)
<rsalvaterra> What MicroTik cards are you using?
<dorf> what's the issue with wifi on the omnia, mangix?
<rsalvaterra> mangix: I probably messed with mine more than you… :P
<mangix> https://git.openwrt.org/?p=project/iwinfo.git;a=commit;h=77a9e98009d43200ab7140acf1fdfd7d3b055c51
<mangix> and yes, the generic listing bothered me enough
<rsalvaterra> Wait, you replaced a QCA9880 card with another QCA9880 card…? Why?
<mangix> Because this one has a heatsink
<rsalvaterra> Hmm… heating problems? I don't remember ever having any issues with heat.
<mangix> I just noticed this crowdsupply thing has Turris Omnia in the comparison, LOL
<mangix> That no on XDP is very misleading
<rsalvaterra> It's not misleading, it's factually wrong, mvneta has XDP support.
<mangix> it's not that
<rsalvaterra> (Not on OpenWrt, though.)
<mangix> XDP can only be used with software buffer management
<mangix> mvneta in OpenWrt uses hardware buffer management
<rsalvaterra> Yes, but it can be disabled.
gladiac1337 has quit [Read error: Connection reset by peer]
gladiac13377 has joined #openwrt-devel
<mangix> sure. do note that XDP support is relatively new :P
<rsalvaterra> I don't know if the XDP benefits would outweigh the performance impact of software buffer management, though.
<mangix> my understanding is the new espressobin stuff uses software buffers
<mangix> at least that's what i got from lorenzo's description
<aparcar[m]> mangix: what's up?
<mangix> ?
<mangix> wtf. HWBM is only used by mvneta but is found under include/net
<mangix> OK. so hardware buffers are only supported on 38x/XP. And nowhere else.
<rsalvaterra> LOL?!
<rsalvaterra> Why not drivers/net/ethernet/marvell?
<mangix> I guess upstream expects more drivers to use hardware buffer management. But so far it's only marvell
feriman has quit [Quit: WeeChat 3.0]
<mangix> yeah, .compatible = "marvell,armada-380-neta-bm"
<mangix> git grep shows only 38x/xp dtsi file
<mangix> s
<mangix> so no 370 or arm64 stuff
<rsalvaterra> But I'd expect buffer management to be something very tightly tied to the specific hardware, not exactly generic.
<mangix> I wonder if the actual hardware doesn't support it or nobody has written a driver for it. Probably the former
<rsalvaterra> And there's also net/core/hwbm.c…
<mangix> looks like only three functions
<mangix> guess that's the non hardware specific stuff
<rsalvaterra> Yeah, the ones declared on the include/net/hwbm.h header.
<mangix> still weird
<mangix> since there's only one user
<rsalvaterra> Oh, well… enough weirdness for one day. Bed time. :P
gch981213886 has quit [Read error: Connection reset by peer]
gch981213886 has joined #openwrt-devel
black_ant has quit [Ping timeout: 246 seconds]
<ynezz> stintel: running netifd in debug mode aka `netifd -d255 -l255` does wonders, feel free to document it https://openwrt.org/docs/techref/netifd
<ynezz> stintel: that -d is debug mask, bit 0 enables system messages, bit 1 enables device messages, bit 2 enables interface messages, bit 3 enables wireless messages
valku has joined #openwrt-devel
gch9812138865 has joined #openwrt-devel
gch981213886 has quit [Read error: Connection reset by peer]
gch9812138865 is now known as gch981213886
<aparcar[m]> mangix you pinged me with some comment of lighthttpd?
urjaman has quit [Read error: Connection reset by peer]
Misanthropos has quit [Ping timeout: 246 seconds]
urjaman has joined #openwrt-devel
gch9812138869 has joined #openwrt-devel
gch981213886 has quit [Read error: Connection reset by peer]
gch9812138869 is now known as gch981213886
goliath has joined #openwrt-devel
Misanthropos has joined #openwrt-devel
hbug_ has joined #openwrt-devel
<mangix> did i?
victhor has quit [Ping timeout: 260 seconds]
hbug has quit [Ping timeout: 240 seconds]
<dorf> simple patch for lighttpd, for whoever's maintaining it: in lighttpd.conf -> server.tag = "<hostname"
tobleminer-tSYS has quit [Quit: AS4242423214]
<mangix> dorf: email gstrauss@gluelogic.com
tobleminer-tSYS has joined #openwrt-devel
<dorf> mangix: he doesn't hang around here then?
<mangix> no
<dorf> shame on him!
<dorf> any idea who is(n't) maintaining i2pd, mangix?
<mangix> that one is nobody
<dorf> yeah, looks like it's not been looked at for a while. :|
<mangix> in other news, it seems there are no 11ax m2/pcie modules for sale anywhere
<dorf> I'm in regular communication with the i2pd lead dev.. if there was a simple make script for the opkg, maybe I could persuade him to integrate it into the CI.
danitool has quit [Quit: Cubum autem in duos cubos, aut quadratoquadratum in duos quadratoquadratos]
gch9812138864 has joined #openwrt-devel
gch981213886 has quit [Read error: Connection reset by peer]
gch9812138864 is now known as gch981213886
<KGB-0> https://tests.reproducible-builds.org/openwrt/openwrt_ar71xx.html has been updated. (99.2% images and 97.5% packages reproducible in our current test framework.)
dorf has quit [Remote host closed the connection]
gch9812138868 has joined #openwrt-devel
gch981213886 has quit [Ping timeout: 240 seconds]
gch9812138868 is now known as gch981213886
gch9812138867 has joined #openwrt-devel
gch981213886 has quit [Read error: Connection reset by peer]
gch9812138867 is now known as gch981213886
mangix has quit [Ping timeout: 256 seconds]
mangix has joined #openwrt-devel
hbug_ has quit [Ping timeout: 240 seconds]
hbug_ has joined #openwrt-devel
sigtrm has quit [Ping timeout: 256 seconds]
gch981213886 has quit [Read error: Connection reset by peer]
gch9812138869 has joined #openwrt-devel
heffer_ has joined #openwrt-devel
heffer has quit [Ping timeout: 246 seconds]
mangix has quit [Read error: Connection reset by peer]
sigtrm has joined #openwrt-devel
mangix has joined #openwrt-devel
nico2 has quit [Remote host closed the connection]
valku has quit [Quit: valku]
voxadam has quit [Ping timeout: 272 seconds]
gch9812138869 has quit [Read error: Connection reset by peer]
gch981213886 has joined #openwrt-devel
nitroshift has joined #openwrt-devel
nitroshift has quit [Remote host closed the connection]
SmugLeaf has joined #openwrt-devel
Weedy has quit [Read error: Connection reset by peer]
nitroshift has joined #openwrt-devel
kakaka has quit [Ping timeout: 240 seconds]
ivanich has joined #openwrt-devel
kakaka has joined #openwrt-devel
rmilecki has quit [Quit: Konversation terminated!]
kakaka has quit [Remote host closed the connection]
kakaka has joined #openwrt-devel
Ycarus has joined #openwrt-devel
black_ant has joined #openwrt-devel
black_ant has quit [Changing host]
black_ant has joined #openwrt-devel
greearb_ has joined #openwrt-devel
greearb has quit [Read error: Connection reset by peer]
feriman has joined #openwrt-devel
<stintel> ynezz: thanks, that could be helpful, I'll try having a look after work
merbanan has quit [Ping timeout: 256 seconds]
danitool has joined #openwrt-devel
matteo_ has joined #openwrt-devel
merbanan has joined #openwrt-devel
voxadam has joined #openwrt-devel
nitroshift has quit [Remote host closed the connection]
nitroshift has joined #openwrt-devel
lmore377 has quit [Ping timeout: 264 seconds]
lmore377 has joined #openwrt-devel
Nick_Lowe has joined #openwrt-devel
adrianschmutzler has joined #openwrt-devel
victhor has joined #openwrt-devel
matteo_ has quit [Ping timeout: 246 seconds]
matteo_ has joined #openwrt-devel
dorf has joined #openwrt-devel
linzst has joined #openwrt-devel
Nick_Lowe has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
adrianschmutzler has quit [Quit: ~ Trillian - www.trillian.im ~]
zjason has quit [Ping timeout: 256 seconds]
matteo_ has quit [Quit: WeeChat 3.0]
Nick_Lowe has joined #openwrt-devel
pgjermshus has quit [Quit: Leaving]
<stintel> if I'm seeing high RxFcsErr and RxAlignErr counters on an ar8236 switch, what should I be looking at?
<jow> gardening
* ldir- spurts tea
<stintel> 😂
<stintel> this is on TP-Link OC200 on the port connected to the CPU. the OEM GPL code is weird, it sets mvneta to phy-mode MII which isn't supported
<stintel> anyway, I tried doing everything that the OEM driver does, and I'm still getting packet loss, due to those 2 reasons
<stintel> and OEM firmware does not show this behavior
feriman has quit [Ping timeout: 240 seconds]
<jow> maybe there's some extra tagging or something on the frames sent from the cpu to the switch?
<jow> fcs error basically means bad checksum, right?
<ldir-> different clocks?
<stintel> here's what I took from the OEM driver
linzst has quit [Ping timeout: 240 seconds]
<stintel> but this is for DSA, so maybe they're indeed enabling something QCA specific that is expected for DSA but causes problems when not using DSA?
<stintel> I recall something about a QCA specific tag in some register
<jow> yeah, that would explain the misalignment and fcs error
<jow> due to the extra leading tag
<stintel> ok, thanks for the hint, it might actually be very helpful
<stintel> bit 11 in port control register is what I should look at then
<stintel> seems to be disabled though :(
Redfoxmoon has quit [Ping timeout: 256 seconds]
zjason has joined #openwrt-devel
adrianschmutzler has joined #openwrt-devel
Redfoxmoon has joined #openwrt-devel
nitroshift has quit [Quit: Gone that way --->]
<rsalvaterra> Sigh. When you just want to do a simple make kernel_oldconfig CONFIG_TARGET=subtarget and the build system says "f**k you, I'm building the whole toolchain"…
<rsalvaterra> FML…
figgyc has joined #openwrt-devel
figgyc has quit [Remote host closed the connection]
valku has joined #openwrt-devel
ivanich has quit [Quit: Konversation terminated!]
ivanich has joined #openwrt-devel
<ldir-> that sort of thing typically happens when I've just done a bad update, didn't remember to take a copy of the known good firmware and now have to wait for the entire lot to rebuild.
<adrianschmutzler> rsalvaterra: that removal of all CONFIG_HAVE_* and almost all CONFIG_ARCH_* looks like a bug to me
<adrianschmutzler> ... in your mt7621 patch
<adrianschmutzler> can you justify this by something I have overlooked, or is this new config-filter just not working correctly?
<rsalvaterra> adrianschmutzler: Those are almost always selected by the specific architecture. And in practice, I'm running my Redmi AC2100 with those changes.
<adrianschmutzler> yes, having them selected by the architecture typically results in having them in the target config
<adrianschmutzler> so, I'm wondering how that would have changed within that same kernel so drastically
<adrianschmutzler> ich werde mir das mal genauer ansehen
<rsalvaterra> Yeah, I've been thinking the same, but the fact is I can't explain (yet, at least) how it works. :/
<adrianschmutzler> I will play around a little. sorry for German in between, was reading something else for a second
<rsalvaterra> Thanks, but I had to Google Translate that… :P
<rsalvaterra> By the way, thanks for fixing my blunder in lantiq… that was stupid, sorry. :(
<rsalvaterra> Completely missed the operator.
<adrianschmutzler> well, i could have seen it as well, or tested, or wondered why it was actually duplicate for _all_ of them ...
<adrianschmutzler> okay, building toolchain now ........ shouldn't have switched to 19.07 before
<rsalvaterra> I know that pain too well. :)
dorf has quit [Remote host closed the connection]
dorf has joined #openwrt-devel
<stintel> hmm so upstream does indeed enable that QCA header mode on the switch CPU port; I am not. will try enabling it but I suspect it'll break things even further
<stintel> unless this mvneta driver somehow expects it?
dorf has quit [Remote host closed the connection]
dorf has joined #openwrt-devel
hbug_ has quit [Remote host closed the connection]
hbug_ has joined #openwrt-devel
<stintel> yeah as expected, with the header enabled it's completely broken
<stintel> I guess I'll have to dig deeper in the changes to the mvneta driver
<stintel> anyone has a link to armada 3720 ethernet datasheet handy?
dorf has quit [Remote host closed the connection]
<adrianschmutzler> rsalvaterra: as I expected, this commit breaks it: https://github.com/openwrt/openwrt/commit/a8fb12a7d62c94fd1bbda332752e0f8c794f3702
MichaelOF has joined #openwrt-devel
gch9812138860 has joined #openwrt-devel
gch981213886 has quit [Read error: Connection reset by peer]
gch9812138860 is now known as gch981213886
<rsalvaterra> adrianschmutzler: Wow. How does it work here at all…? O_o
<adrianschmutzler> I just reverted that commit and then I get something that looks reasonable after "make kernel_oldconfig"
<adrianschmutzler> Unless I'm totally mistaken somewhere
<rsalvaterra> Ok, I guess I need to dig deeper. Thanks for the heads-up!
Pix has quit [Ping timeout: 260 seconds]
<adrianschmutzler> I suspect it's just some quoting issue, and the stuff in config-filter is not matched as a whole, but only it's fragments. But I don't really understand that commit in detail
<adrianschmutzler> it's->its
dorf has joined #openwrt-devel
gch981213886 has quit [Quit: The Lounge - https://thelounge.chat]
gch9812138860 has joined #openwrt-devel
<stintel> 120 packets transmitted, 120 received, 0% packet loss, time 121146ms
<stintel> yay
<stintel> new_ctrl2 |= MVNETA_GMAC2_PORT_RGMII; -> new_ctrl2 &= ~MVNETA_GMAC2_PORT_RGMII;
feriman has joined #openwrt-devel
Nick_Lowe has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
MichaelOF has quit [Quit: Konversation terminated!]
Nick_Lowe has joined #openwrt-devel
dangole has joined #openwrt-devel
dorf has quit [Remote host closed the connection]
dorf has joined #openwrt-devel
ByteEnable has joined #openwrt-devel
<ByteEnable> git master is failing: ERROR: package/feeds/packages/docker-ce failed to build.
<ByteEnable> Looks like it is for PKG_SOURCE_VERSION stuff.
Redfoxmoon has joined #openwrt-devel
Redfoxmoon has quit [Changing host]
Nick_Lowe has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
<ByteEnable> ERROR: Expected 'PKG_SOURCE_VERSION:=dc9208a3303feef5b3839f4323d9beb36df0a9dd' in '../runc/Makefile', found 'PKG_SOURCE_VERSION:=ff819c7e9184c13b7c2607fe6c30ae19403a7aff'
feriman has quit [Ping timeout: 240 seconds]
<rsalvaterra> adrianschmutzler: So, um… do I need to do anything? :)
MarioH has quit [Quit: ZNC 1.8.2 - https://znc.in]
MarioH has joined #openwrt-devel
ivanich has quit [Quit: Konversation terminated!]
<ByteEnable> Found the issue on github. https://github.com/openwrt/packages/issues/13998
<adrianschmutzler> rsalvaterra: not necessarily.
<adrianschmutzler> I only have a rough understanding of what Felix's change does, so I'm not able to fully judge this thing at the moment.
<rsalvaterra> Well, an easy test is to check the .config.set before and after my patch.
<adrianschmutzler> So, my current plan is to just wait until somebody will have a closer look (which might be myself at some point where I have more time).
<rsalvaterra> There should be no changes whatsoever.
<adrianschmutzler> And that was essentially Felix's final question in his first e-mail, where I don't have the time to investigate deeper at the moment
Rene__ has quit [Quit: leaving]
<rsalvaterra> Alright, I'm going to do a build here and see if there are any differences. I'll reply to the email with my findings.
nitdega has quit [Quit: ZNC - 1.6.0 - http://znc.in]
Rene__ has joined #openwrt-devel
nitdega has joined #openwrt-devel
<lynxis> evening
ivanich has joined #openwrt-devel
dorf has quit [Remote host closed the connection]
dorf has joined #openwrt-devel
feriman has joined #openwrt-devel
Ycarus has quit [Quit: Ycarus]
Borromini has joined #openwrt-devel
<Tapper> evening
Darkmatter66 has joined #openwrt-devel
lmore377 has quit [Ping timeout: 265 seconds]
lmore377_ has joined #openwrt-devel
lmore377_ has quit [Ping timeout: 260 seconds]
lmore377 has joined #openwrt-devel
Nick_Lowe has joined #openwrt-devel
feriman has quit [Quit: WeeChat 3.0]
feriman has joined #openwrt-devel
ivanich has quit [Quit: Konversation terminated!]
ivanich has joined #openwrt-devel
Nick_Lowe has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
<Borromini> o/ Tapper
lmore377 has quit [Ping timeout: 256 seconds]
lmore377 has joined #openwrt-devel
Darkmatter66 has quit [Remote host closed the connection]
Darkmatter66 has joined #openwrt-devel
Nick_Lowe has joined #openwrt-devel
ivanich has quit [Quit: Konversation terminated!]
ivanich has joined #openwrt-devel
tmn505 has quit [Quit: leaving]
tmn505 has joined #openwrt-devel
indy has quit [Ping timeout: 264 seconds]
ivanich has quit [Quit: Konversation terminated!]
lmore377 has quit [Ping timeout: 260 seconds]
lmore377 has joined #openwrt-devel
adrianschmutzler has quit [Quit: ~ Trillian - www.trillian.im ~]
figgyc has joined #openwrt-devel
Redfoxmoon has quit [Read error: Connection reset by peer]
Redfoxmoon has joined #openwrt-devel
indy has joined #openwrt-devel
Darkmatter66 has quit [Ping timeout: 246 seconds]
Redfoxmoon has quit [Changing host]
Redfoxmoon has joined #openwrt-devel
Darkmatter66 has joined #openwrt-devel
feriman has quit [Quit: WeeChat 3.0]
Risk64 has joined #openwrt-devel
Borromini has left #openwrt-devel [#openwrt-devel]
Nick_Lowe has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
Nick_Lowe has joined #openwrt-devel
Nick_Lowe has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
ByteEnable has quit [Quit: Leaving]
Nick_Lowe has joined #openwrt-devel
Nick_Lowe has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]