<old-papa-work>
I purchase a few things from china.. Power Supplies, RJ45 to Video Baluns.. indirectly ChiMei 10.4" panels and from Germany, Controller boards for the panels.. This year alone be 1500 units.
<old-papa-work>
I don't purchase, located and had PO made..
diffycat has joined #cubieboard
delusr_ has joined #cubieboard
<mnemoc>
if you want to buy large qty you are better contacting tom directly. for a couple of pieces, any distributor will do
<old-papa-work>
Yup, will get that done..
<old-papa-work>
Will run it under android.. previous product has android apps in it now.. this will cut down time
delusr_ has quit [Ping timeout: 256 seconds]
arod_ has joined #cubieboard
arod_ has quit [Client Quit]
arod has joined #cubieboard
<arod>
does the CB come with android preloaded? I did connect it to a TV (HDMI) and I'm getting non signal. Red and green LED are on
<arod>
what's wrong?
<old-papa-work>
I have read the newer boards have android..
<old-papa-work>
But I have only been researching for a day now..
<arod>
well I've tried on two TVs and screen is black. I can't tell about monitors. I've got DVI only
franzolin is now known as franzolin[AWAY]
sky770 has joined #cubieboard
CoolePascal has joined #cubieboard
CoolePascal has left #cubieboard [#cubieboard]
arod_ has joined #cubieboard
arod has quit [Ping timeout: 260 seconds]
arod_ is now known as arod
sky770_ has joined #cubieboard
tpaper has joined #cubieboard
sky770_ has quit [Read error: Connection reset by peer]
sky770_ has joined #cubieboard
sky770 has quit [Read error: Connection reset by peer]
sky770_ has quit [Client Quit]
<BigWhoop[DE]>
arod you can look at the ttl to see whats wrong.
<BigWhoop[DE]>
you only need a cheap usb ttl converter
smccarthy has joined #cubieboard
AlphaPinky has joined #cubieboard
<joph>
arod, mine had android preinstalled, but i bought it used
<joph>
arod, power source?
<joph>
i have these issues if i use a to small power supply
Ghoom has quit [Quit: Page closed]
ibot has quit [Ping timeout: 252 seconds]
AndrevS has quit [Quit: Leaving]
chihchun is now known as chihchun_afk
<wooy>
Mele M5 = cubieboard v2?
err404 has quit [Read error: Connection reset by peer]
<Swat->
mnemoc: ok will download them and write them to the sd-card.
<Swat->
rm: yes i see now, missed that.
smccarth_ has joined #cubieboard
smccarthy has quit [Read error: Connection reset by peer]
smccarth_ has quit [Remote host closed the connection]
smccarthy2 has quit [Ping timeout: 252 seconds]
smccarthy has joined #cubieboard
smccarthy has quit [Remote host closed the connection]
leowt has quit [Ping timeout: 264 seconds]
datagutt has quit [Quit: kthxbai]
verysoftoiletppr has joined #cubieboard
<Swat->
mnemoc: that script is intended to run on a linux host, unfortunatly i am running mac-os-x atm :-/
<mnemoc>
:(
<Swat->
but i see what they are trying, basically 2 partitions, 1 vfat and 1 ext4 and then write the data to it
<mnemoc>
current u-boot for sunxi support single extX partition too
<mnemoc>
and you put the files in the /boot directory
<Swat->
so when i create 1 partition and dump all files in there it should be all good?
<\\Mr_C\\>
is there a way to do the newest hwpack and files to the nand and busybox only?
rz2k has joined #cubieboard
eebrah is now known as eebrah|away
Undertasker has quit [Read error: Connection reset by peer]
bigx has quit [Ping timeout: 276 seconds]
Undertasker has joined #cubieboard
diffycat has quit [Read error: Operation timed out]
Thihi_ is now known as Thihi
nils_2_ has joined #cubieboard
Undertasker has left #cubieboard [#cubieboard]
<Swat->
I should be able to get output on a normal pc monitor with the cubieboard right?
Undertasker has joined #cubieboard
<\\Mr_C\\>
with what port?
<\\Mr_C\\>
hdmi to vga?
MrCurious_ has joined #cubieboard
<Swat->
hdmi to dvi
<\\Mr_C\\>
oh
<\\Mr_C\\>
hmm, maybe
<Thihi>
Yes.
<\\Mr_C\\>
might have to adjust the settings file
nils_2 has quit [Ping timeout: 276 seconds]
MrCurious has quit [Ping timeout: 276 seconds]
fuwei has quit [Ping timeout: 276 seconds]
MrCurious_ is now known as MrCurious
Undertasker has quit [Write error: Broken pipe]
<Thihi>
Yeah, but at least hdmi and dvi are compatible (except the almost non-existant dvi-a), so in theory it should work fine.
<Swat->
Okay, well i was just booting off nand (android) but i does not output anything, except on my tv it does
nils_2_ is now known as nils_2
shineworld has joined #cubieboard
mab has joined #cubieboard
<Swat->
Well i changed the output to vga in android but still nothing on my pc monitor. I guess i have a shitty monitor :-)
emilepetrone has quit [Remote host closed the connection]
emilepetrone has joined #cubieboard
emilepetrone has quit [Read error: Connection reset by peer]
emilepetrone has joined #cubieboard
Undertasker has joined #cubieboard
emilepetrone has quit [Ping timeout: 260 seconds]
Gumboot has joined #cubieboard
smccarthy has joined #cubieboard
verysoftoiletppr has quit [Ping timeout: 252 seconds]
prassel has quit [Ping timeout: 252 seconds]
emilepet_ has joined #cubieboard
Undertasker has quit [Read error: Connection reset by peer]
Undertasker has joined #cubieboard
tpaper has joined #cubieboard
AlphaPinky has quit [Quit: AlphaPinky]
Ghoom has joined #cubieboard
<Ghoom>
!ls
rmarko has quit [Excess Flood]
Ghoom has quit [Ping timeout: 250 seconds]
n01 has quit [Ping timeout: 260 seconds]
rmarko has joined #cubieboard
smccarthy has quit [Remote host closed the connection]
smccarthy has joined #cubieboard
ricardocrudo has quit [Remote host closed the connection]
tpaper has quit [Quit: Sto andando via]
h0cin has quit [Quit: Leaving]
mab has quit [Ping timeout: 264 seconds]
tpaper has joined #cubieboard
<user_2>
Hi. I have image on uSD and it works well. they i try do "dd" the same image on /dev/nand, but after reboot with only nand, CB does not start up. what I mess?
<mnemoc>
nand and mmc (uSD) use different bootloaders
<mnemoc>
and a totally different partitions system
<user_2>
so, how u vat to do to "replicate" on nand the same istallatio i have on uSD?
<user_2>
there are images i can dd on nand, so how to create that image?
<mnemoc>
repartition the nand using the tool in sunxi-tools, format them yourself, and then rsync/tar the files from one side to the other
<mnemoc>
after you get a bootable nand, you can dd /dev/nand into a fat and wasteful .bin, yes
kludge` has quit [Quit: leaving]
<user_2>
mnemoc, there are a link you can succest me with howto inside?
<mnemoc>
do that a couple of times and say good bye to your nand
<user_2>
suggest*
kludge` has joined #cubieboard
<user_2>
do you mean nand is delicate and dd destroy it?
<mnemoc>
user_2: it has limited amount of writes
<mnemoc>
user_2: a large dd will write it all, each time
<user_2>
afaik, flah has at least 10000 write cicle
<user_2>
till no i dd oly one time
<mnemoc>
fine, go ahead and wear it out
<mnemoc>
i prefer to not write the space that doesn't need to be written
<user_2>
mnemoc, my goal is to have a installation on nand and not on uSD, just that
<mnemoc>
trivial to script. stupid to dd
<user_2>
i never did before, so im hero to collect info to do that.
<user_2>
im here*
<mnemoc>
as you already dd'ed the uSD into the nand you'll probably need to reflash your CB to recover from the damage
<user_2>
yes i can reflash, is not a problem
<mnemoc>
then repartition it and replace nanda's u-boot.bin with one built from the lichee-dev branch of u-boot-sunxi
<mnemoc>
it needs a partition with a particular name for it's env, don't remember exactly right now
<mnemoc>
but everything else can be one large partition, which you just format
<mnemoc>
then use rsync or tar to copy your rootfs from uSD to the large nand partition
<mnemoc>
and the files in /boot to nanda
<mnemoc>
play a bit with the u-boot env, and done
<user_2>
tomorrow i explore http://linux-sunxi.org/Main_Page deeply to look infos, not time to sleep, my mind is out or order.... anywau thanks for suggestion.
old-papa-work has quit []
<mnemoc>
user_2: you might be the first to document this :)
<mnemoc>
search for an script posted on the sunxi ML by patrick wood
<user_2>
the luky man i am :-)
<suhanc>
hey guys,usual question..last time i asked netbsd folks no correct result yet..any *bsd running on the cubie,using all the sensors and ethernet?
<mnemoc>
he made the repartitioning tool, but also posted an script to "move" from uSD to nand