02:18 <GitHub188> [artiq] sbourdeauducq commented on issue #767: Did you set the IP/MAC and is Ethernet connected? https://github.com/m-labs/artiq/issues/767#issuecomment-313569228

02:20 <GitHub63> [artiq] sbourdeauducq commented on issue #767: Also I'm curious how you can connect the HDMI cable in a way that prevents the board from turning on. Was the other end connected to the HDMI output of the PC you use for flashing? https://github.com/m-labs/artiq/issues/767#issuecomment-313569528

02:35 <GitHub144> [artiq] sbourdeauducq commented on issue #773: > But it is enabled at the RTIO channel level for all RTIO operations to that channel, and cannot currently be applied to certain operations only.... https://github.com/m-labs/artiq/issues/773#issuecomment-313571431

06:01 <GitHub69> [artiq] jordens commented on issue #773: The only thing you can do on a spline channel is setting the current spline coefficients. https://github.com/m-labs/artiq/issues/773#issuecomment-313594591

09:20 <GitHub80> [artiq] jordens commented on issue #765: You are intentionally misinterpreting me. I said that I would force serialization by signalling `RTIOCollisions`. https://github.com/m-labs/artiq/issues/765#issuecomment-313632165

09:45 <GitHub140> [artiq] jordens closed issue #773: rtio: RTIOcollision for simultaneous events https://github.com/m-labs/artiq/issues/773

09:45 <GitHub165> artiq/master f0841f5 Robert Jordens: spline: be really verbose...

09:45 <GitHub165> artiq/master 7b130a2 Robert Jordens: sawg: confirm smooth(order=3)

09:45 <GitHub165> artiq/master 3bc0e32 Robert Jordens: sawg: advance the timeline on Config access...

09:45 <GitHub165> [artiq] jordens pushed 3 new commits to master: https://github.com/m-labs/artiq/compare/3222f5036f72...f0841f548930

10:08 <bb-m-labs> build #709 of artiq-board is complete: Success [build successful] Build details are at http://buildbot.m-labs.hk/builders/artiq-board/builds/709

10:21 <bb-m-labs> build #520 of artiq-win64-test is complete: Success [build successful] Build details are at http://buildbot.m-labs.hk/builders/artiq-win64-test/builds/520

10:21 <bb-m-labs> build #1612 of artiq is complete: Success [build successful] Build details are at http://buildbot.m-labs.hk/builders/artiq/builds/1612

14:25 <GitHub134> [artiq] trxw commented on issue #767: We can't ping it. We set the IP/MAC as per the first set of instructions and the Ethernet is connected.... https://github.com/m-labs/artiq/issues/767#issuecomment-313697012

14:26 <GitHub139> [artiq] sbourdeauducq commented on issue #767: Are the Ethernet LEDs on on both ends? Have you tried with a different network card, switch, etc.? https://github.com/m-labs/artiq/issues/767#issuecomment-313697374

15:09 <GitHub37> [artiq] trxw commented on issue #767: The LEDs are on both ends. We are using the same network card as we use for the internet, so there shouldn't be an issue there. https://github.com/m-labs/artiq/issues/767#issuecomment-313709076

15:14 <GitHub148> [artiq] sbourdeauducq commented on issue #767: Yes, but there is, so please try. Also review firewall settings, routers, etc. Are you connected to the PC directly without any switch/router? https://github.com/m-labs/artiq/issues/767#issuecomment-313710330

15:14 <GitHub70> [artiq] jordens commented on issue #772: 3222f5036f72b35a6f3a1374c3210b5acba51bc8 https://github.com/m-labs/artiq/issues/772#issuecomment-313710329

15:20 <GitHub53> [artiq] trxw commented on issue #767: We are not using any firewall or router. We are connected to the PC directly. https://github.com/m-labs/artiq/issues/767#issuecomment-313712104

15:22 <GitHub139> [artiq] sbourdeauducq commented on issue #767: Then check your IP settings on the PC side as well, and if you don't find and fix a problem there, try a different network card. What is the output of ``ip addr show`` for that network card? https://github.com/m-labs/artiq/issues/767#issuecomment-313712506

15:26 <GitHub198> [artiq] trxw commented on issue #767: ... https://github.com/m-labs/artiq/issues/767#issuecomment-313713626

15:27 <GitHub174> [artiq] sbourdeauducq commented on issue #767: Well yes, you need to set an IP address for the PC. https://github.com/m-labs/artiq/issues/767#issuecomment-313713846

15:37 <GitHub10> [artiq] trxw commented on issue #767: We ran the following command:... https://github.com/m-labs/artiq/issues/767#issuecomment-313716591

15:38 <GitHub52> [artiq] sbourdeauducq commented on issue #767: > 198.192.0.1... https://github.com/m-labs/artiq/issues/767#issuecomment-313716806

15:51 <GitHub122> [artiq] sbourdeauducq commented on issue #767: If you have not done this before, try to connect to PCs with an Ethernet cable directly and make them communicate. https://github.com/m-labs/artiq/issues/767#issuecomment-313720147

15:51 <GitHub78> [artiq] sbourdeauducq commented on issue #767: If you have not done this before, try to connect two PCs with an Ethernet cable directly and make them communicate. https://github.com/m-labs/artiq/issues/767#issuecomment-313720147

17:45 <GitHub175> [artiq] jbqubit commented on issue #772: @jordens Thanks for documenting this. https://github.com/m-labs/artiq/issues/772#issuecomment-313748165

18:56 <GitHub166> [artiq] jbqubit opened issue #775: typo in example device_db.py https://github.com/m-labs/artiq/issues/775

19:04 <GitHub184> [artiq] jbqubit commented on issue #775: Error 1 is typo in artiq_corelog... https://github.com/m-labs/artiq/issues/775#issuecomment-313766843

19:07 <GitHub105> [artiq] cjbe commented on issue #775: This is not a typo. `aqctl_corelog` runs [artiq.frontend.aqctl_corelog](https://github.com/m-labs/artiq/blob/master/artiq/frontend/aqctl_corelog.py) - the core device logging controller https://github.com/m-labs/artiq/issues/775#issuecomment-313767710

19:12 <GitHub89> [artiq] trxw commented on issue #767: Yes, that is a LAN address we set. We are also connected via a crossover Ethernet cable. The card works ok with routers so it should be fine. https://github.com/m-labs/artiq/issues/767#issuecomment-313768639

19:26 <GitHub86> [artiq] trxw commented on issue #767: Yes, that is a LAN address we set. We are also connected via a crossover Ethernet cable. The card works ok with routers so it should be fine. ... https://github.com/m-labs/artiq/issues/767#issuecomment-313768639

19:27 <GitHub130> [artiq] trxw commented on issue #767: Yes, that is a LAN address we set. We are also connected via a crossover Ethernet cable. The card works ok with routers so it should be fine. ... https://github.com/m-labs/artiq/issues/767#issuecomment-313768639

19:32 <GitHub142> [artiq] trxw commented on issue #767: @jordens @sbourdeauducq ... https://github.com/m-labs/artiq/issues/767#issuecomment-313768639

19:34 <GitHub25> [artiq] jbqubit closed issue #775: typo in example device_db.py https://github.com/m-labs/artiq/issues/775

19:34 <GitHub28> [artiq] jbqubit commented on issue #775: @cjbe Thanks for the heads up. I see that controllers are now renamed in v3. (artiq/doc/manual/_build/html/release_notes.html). For some reason I did have aqctl_lda but not aqctl_corelog in anaconda3/envs/artiq3test4/bin. So I thought artiq_session was still using artiq_corelog. ... https://github.com/m-labs/artiq/issues/775#issuecomment-313773312

19:43 <GitHub129> [artiq] jbqubit commented on issue #765: In #762 @jordens said... https://github.com/m-labs/artiq/issues/765#issuecomment-313775201

19:50 <GitHub175> [artiq] jbqubit commented on issue #691: A user running ARTIQ Dashboard remains blithely unawares of RTIO Collisions (eg #765) since artiq.frontend.aqctl_corelog is not yet implemented. @whitequark How's your search going for the elegant solution? :) https://github.com/m-labs/artiq/issues/691#issuecomment-313776636

19:50 <jbqubit> bb-m-labs: force build --props=package=artiq-kc705-phaser artiq-board

19:51 <bb-m-labs> build forced [ETA 13m00s]

19:51 <bb-m-labs> I'll give a shout when the build finishes

20:02 <GitHub130> [artiq] whitequark commented on issue #691: @jbqubit Oh, I've figured that out long ago, and actually I already have an implementation. I think I'll push it tomorrow. https://github.com/m-labs/artiq/issues/691#issuecomment-313779274

20:04 <GitHub167> [artiq] jbqubit commented on issue #691: @whitequark Cool! Thanks. :) https://github.com/m-labs/artiq/issues/691#issuecomment-313779651

20:09 <bb-m-labs> build #710 of artiq-board is complete: Success [build successful] Build details are at http://buildbot.m-labs.hk/builders/artiq-board/builds/710

20:23 <GitHub93> [artiq] jordens commented on issue #767: And you have a router on that network that is aware of routes to 198.192.0.1 and 128.61.118.48. And 128.61.118.48 is aware of that router? (Or 128.61.118.48 is aware of a direct route to 198.192.0.1). https://github.com/m-labs/artiq/issues/767#issuecomment-313784026

21:04 <jbqubit> Having trouble building rust. https://gist.github.com/jbqubit/faa0ba29602137c26d625fe350865dc5

21:18 <GitHub6> [artiq] jbqubit commented on issue #771: Confirmed. https://github.com/m-labs/artiq/issues/771#issuecomment-313795482

21:43 <jbqubit> Regarding rust build... looks like rust binary distributed via conda package artiq-dev is sufficient. Disregard my gist.