08:48 <_florent_> Hi ethanhs, the Trellisboard is not commercially available but a few batches have been made. I know somlo here made at least one batch but don't know if the he has some remaining to sell

08:49 <_florent_> Otherwise, for PCIe / low cost if you want to play with LiteX I would recommend an Artix7 based board for now (LitePCIe currently does not support ECP5)

08:51 <_florent_> Ethernet is supported on both several FPGA devices (Artix7, ECP5, etc...) but the Acorn does not have Ethernet natively. (but it could be done with the SerDes and a SFP/1GBps Ethernet module).

08:52 <_florent_> If you don't need PCIe, the Arty is also a nice, not to expensive board that is now supported by SymbiFlow

08:54 <_florent_> On ECP5, there is also the new ECPIX-5: https://shop.lambdaconcept.com/home/46-1-ecpix-5.html

08:54 <tpb> Title: ECPIX-5 (at shop.lambdaconcept.com)

09:14 <ethanhs> Hi _florent_, thank you so much for the info!

09:16 <ethanhs> My project needs ethernet and pcie unfortunately, so I might need to look at SerDes

18:46 <andrewb1999> Has anyone used the pynq z1 with litex before?

18:47 <andrewb1999> I don't think it should be much different from the zybo z7, but I'm not sure if the zybo z7 target is intended for the 7010 or the 7020 variant

19:01 <zyp> 7010: https://github.com/litex-hub/litex-boards/blob/master/litex_boards/platforms/zybo_z7.py#L96

19:02 <andrewb1999> zyp: I see. Is there any work to support the 7020 ps?

19:03 <zyp> I figure you just change that line to read xc7z020 instead :)

19:04 <andrewb1999> zyp: I'm not sure if the 7020 PS to PL IOs are the same as the 7010 but I will cross my fingers and try it.

19:05 <daveshah> afaik the PS7 is the same across all Zynqs

19:06 <andrewb1999> daveshah: Ok thanks, that would definitely make it easier